lkml.org 
[lkml]   [2019]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.9 20/38] bnx2x: Do not handle requests from VFs after parity
Date
From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 7113f796bbbced2470cd6d7379d50d7a7a78bf34 ]

Parity error from the hardware will cause PF to lose the state
of their VFs due to PF's internal reload and hardware reset following
the parity error. Restrict any configuration request from the VFs after
the parity as it could cause unexpected hardware behavior, only way
for VFs to recover would be to trigger FLR on VFs and reload them.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 12 ++++++++++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 1 +
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 12 ++++++++++++
3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index ce8a777b1e97..8d17d464c067 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -9995,10 +9995,18 @@ static void bnx2x_recovery_failed(struct bnx2x *bp)
*/
static void bnx2x_parity_recover(struct bnx2x *bp)
{
- bool global = false;
u32 error_recovered, error_unrecovered;
- bool is_parity;
+ bool is_parity, global = false;
+#ifdef CONFIG_BNX2X_SRIOV
+ int vf_idx;
+
+ for (vf_idx = 0; vf_idx < bp->requested_nr_virtfn; vf_idx++) {
+ struct bnx2x_virtf *vf = BP_VF(bp, vf_idx);

+ if (vf)
+ vf->state = VF_LOST;
+ }
+#endif
DP(NETIF_MSG_HW, "Handling parity\n");
while (1) {
switch (bp->recovery_state) {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index 888d0b6632e8..7152a03e3607 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -139,6 +139,7 @@ struct bnx2x_virtf {
#define VF_ACQUIRED 1 /* VF acquired, but not initialized */
#define VF_ENABLED 2 /* VF Enabled */
#define VF_RESET 3 /* VF FLR'd, pending cleanup */
+#define VF_LOST 4 /* Recovery while VFs are loaded */

bool flr_clnup_stage; /* true during flr cleanup */

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index c2d327d9dff0..27142fb195b6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -2095,6 +2095,18 @@ static void bnx2x_vf_mbx_request(struct bnx2x *bp, struct bnx2x_virtf *vf,
{
int i;

+ if (vf->state == VF_LOST) {
+ /* Just ack the FW and return if VFs are lost
+ * in case of parity error. VFs are supposed to be timedout
+ * on waiting for PF response.
+ */
+ DP(BNX2X_MSG_IOV,
+ "VF 0x%x lost, not handling the request\n", vf->abs_vfid);
+
+ storm_memset_vf_mbx_ack(bp, vf->abs_vfid);
+ return;
+ }
+
/* check if tlv type is known */
if (bnx2x_tlv_supported(mbx->first_tlv.tl.type)) {
/* Lock the per vf op mutex and note the locker's identity.
--
2.20.1
\
 
 \ /
  Last update: 2019-12-27 19:19    [W:0.107 / U:12.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site