lkml.org 
[lkml]   [2019]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180.
From
Date

On 12/27/2019 11:52 AM, Bjorn Andersson wrote:
> On Mon 23 Dec 05:14 PST 2019, Rajeshwari wrote:
>
> This patch adds critical interrupt to tsens nodes, add cooling maps,
> renames nodes and renames labels.
>
> While the end result looks reasonable I would like to see this split in
> a few different patches - and perhaps a line or two in the commit
> message describing the new naming scheme for the renames.
yeah sure, I'll provide separate patch for renames.
> Thanks,
> Rajeshwari
>
>> Signed-off-by: Rajeshwari <rkambl@codeaurora.org>
>> ---
>> arch/arm64/boot/dts/qcom/sc7180.dtsi | 289 +++++++++++++++++++++++++++++------
>> 1 file changed, 239 insertions(+), 50 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index 3676bfd..e419ca0 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -10,6 +10,7 @@
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> #include <dt-bindings/phy/phy-qcom-qusb2.h>
>> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +#include <dt-bindings/thermal/thermal.h>
>>
>> / {
>> interrupt-parent = <&intc>;
>> @@ -78,6 +79,7 @@
>> reg = <0x0 0x0>;
>> enable-method = "psci";
>> next-level-cache = <&L2_0>;
>> + #cooling-cells = <2>;
>> qcom,freq-domain = <&cpufreq_hw 0>;
>> L2_0: l2-cache {
>> compatible = "cache";
>> @@ -94,6 +96,7 @@
>> reg = <0x0 0x100>;
>> enable-method = "psci";
>> next-level-cache = <&L2_100>;
>> + #cooling-cells = <2>;
>> qcom,freq-domain = <&cpufreq_hw 0>;
>> L2_100: l2-cache {
>> compatible = "cache";
>> @@ -107,6 +110,7 @@
>> reg = <0x0 0x200>;
>> enable-method = "psci";
>> next-level-cache = <&L2_200>;
>> + #cooling-cells = <2>;
>> qcom,freq-domain = <&cpufreq_hw 0>;
>> L2_200: l2-cache {
>> compatible = "cache";
>> @@ -120,6 +124,7 @@
>> reg = <0x0 0x300>;
>> enable-method = "psci";
>> next-level-cache = <&L2_300>;
>> + #cooling-cells = <2>;
>> qcom,freq-domain = <&cpufreq_hw 0>;
>> L2_300: l2-cache {
>> compatible = "cache";
>> @@ -133,6 +138,7 @@
>> reg = <0x0 0x400>;
>> enable-method = "psci";
>> next-level-cache = <&L2_400>;
>> + #cooling-cells = <2>;
>> qcom,freq-domain = <&cpufreq_hw 0>;
>> L2_400: l2-cache {
>> compatible = "cache";
>> @@ -146,6 +152,7 @@
>> reg = <0x0 0x500>;
>> enable-method = "psci";
>> next-level-cache = <&L2_500>;
>> + #cooling-cells = <2>;
>> qcom,freq-domain = <&cpufreq_hw 0>;
>> L2_500: l2-cache {
>> compatible = "cache";
>> @@ -159,6 +166,7 @@
>> reg = <0x0 0x600>;
>> enable-method = "psci";
>> next-level-cache = <&L2_600>;
>> + #cooling-cells = <2>;
>> qcom,freq-domain = <&cpufreq_hw 1>;
>> L2_600: l2-cache {
>> compatible = "cache";
>> @@ -172,6 +180,7 @@
>> reg = <0x0 0x700>;
>> enable-method = "psci";
>> next-level-cache = <&L2_700>;
>> + #cooling-cells = <2>;
>> qcom,freq-domain = <&cpufreq_hw 1>;
>> L2_700: l2-cache {
>> compatible = "cache";
>> @@ -1058,8 +1067,9 @@
>> reg = <0 0x0c263000 0 0x1ff>, /* TM */
>> <0 0x0c222000 0 0x1ff>; /* SROT */
>> #qcom,sensors = <15>;
>> - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
>> - interrupt-names = "uplow";
>> + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "uplow","critical";
>> #thermal-sensor-cells = <1>;
>> };
>>
>> @@ -1068,8 +1078,9 @@
>> reg = <0 0x0c265000 0 0x1ff>, /* TM */
>> <0 0x0c223000 0 0x1ff>; /* SROT */
>> #qcom,sensors = <10>;
>> - interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
>> - interrupt-names = "uplow";
>> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "uplow","critical";
>> #thermal-sensor-cells = <1>;
>> };
>>
>> @@ -1301,277 +1312,455 @@
>> };
>>
>> thermal-zones {
>> - cpu0-thermal {
>> + cpu_0_0-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> thermal-sensors = <&tsens0 1>;
>>
>> trips {
>> - cpu0_alert0: trip-point0 {
>> + cpu_0_0_alert0: trip-point0 {
>> temperature = <90000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu0_alert1: trip-point1 {
>> + cpu_0_0_alert1: trip-point1 {
>> temperature = <95000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu0_crit: cpu_crit {
>> + cpu_0_0_crit: cpu_crit {
>> temperature = <110000>;
>> hysteresis = <1000>;
>> type = "critical";
>> };
>> };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_0_0_alert0>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + map1 {
>> + trip = <&cpu_0_0_alert1>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> };
>>
>> - cpu1-thermal {
>> + cpu_0_1-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> thermal-sensors = <&tsens0 2>;
>>
>> trips {
>> - cpu1_alert0: trip-point0 {
>> + cpu_0_1_alert0: trip-point0 {
>> temperature = <90000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu1_alert1: trip-point1 {
>> + cpu_0_1_alert1: trip-point1 {
>> temperature = <95000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu1_crit: cpu_crit {
>> + cpu_0_1_crit: cpu_crit {
>> temperature = <110000>;
>> hysteresis = <1000>;
>> type = "critical";
>> };
>> };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_0_1_alert0>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + map1 {
>> + trip = <&cpu_0_1_alert1>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> };
>>
>> - cpu2-thermal {
>> + cpu_0_2-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> thermal-sensors = <&tsens0 3>;
>>
>> trips {
>> - cpu2_alert0: trip-point0 {
>> + cpu_0_2_alert0: trip-point0 {
>> temperature = <90000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu2_alert1: trip-point1 {
>> + cpu_0_2_alert1: trip-point1 {
>> temperature = <95000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu2_crit: cpu_crit {
>> + cpu_0_2_crit: cpu_crit {
>> temperature = <110000>;
>> hysteresis = <1000>;
>> type = "critical";
>> };
>> };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_0_2_alert0>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + map1 {
>> + trip = <&cpu_0_2_alert1>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> };
>>
>> - cpu3-thermal {
>> + cpu_0_3-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> thermal-sensors = <&tsens0 4>;
>>
>> trips {
>> - cpu3_alert0: trip-point0 {
>> + cpu_0_3_alert0: trip-point0 {
>> temperature = <90000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu3_alert1: trip-point1 {
>> + cpu_0_3_alert1: trip-point1 {
>> temperature = <95000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu3_crit: cpu_crit {
>> + cpu_0_3_crit: cpu_crit {
>> temperature = <110000>;
>> hysteresis = <1000>;
>> type = "critical";
>> };
>> };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_0_3_alert0>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + map1 {
>> + trip = <&cpu_0_3_alert1>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> };
>>
>> - cpu4-thermal {
>> + cpu_0_4-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> thermal-sensors = <&tsens0 5>;
>>
>> trips {
>> - cpu4_alert0: trip-point0 {
>> + cpu_0_4_alert0: trip-point0 {
>> temperature = <90000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu4_alert1: trip-point1 {
>> + cpu_0_4_alert1: trip-point1 {
>> temperature = <95000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu4_crit: cpu_crit {
>> + cpu_0_4_crit: cpu_crit {
>> temperature = <110000>;
>> hysteresis = <1000>;
>> type = "critical";
>> };
>> };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_0_4_alert0>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + map1 {
>> + trip = <&cpu_0_4_alert1>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> };
>>
>> - cpu5-thermal {
>> + cpu_0_5-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> thermal-sensors = <&tsens0 6>;
>>
>> trips {
>> - cpu5_alert0: trip-point0 {
>> + cpu_0_5_alert0: trip-point0 {
>> temperature = <90000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu5_alert1: trip-point1 {
>> + cpu_0_5_alert1: trip-point1 {
>> temperature = <95000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu5_crit: cpu_crit {
>> + cpu_0_5_crit: cpu_crit {
>> temperature = <110000>;
>> hysteresis = <1000>;
>> type = "critical";
>> };
>> };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_0_5_alert0>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + map1 {
>> + trip = <&cpu_0_5_alert1>;
>> + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> };
>>
>> - cpu6-thermal {
>> + cpu_1_0-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> thermal-sensors = <&tsens0 9>;
>>
>> trips {
>> - cpu6_alert0: trip-point0 {
>> + cpu_1_0_alert0: trip-point0 {
>> temperature = <90000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu6_alert1: trip-point1 {
>> + cpu_1_0_alert1: trip-point1 {
>> temperature = <95000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu6_crit: cpu_crit {
>> + cpu_1_0_crit: cpu_crit {
>> temperature = <110000>;
>> hysteresis = <1000>;
>> type = "critical";
>> };
>> };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_1_0_alert0>;
>> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + map1 {
>> + trip = <&cpu_1_0_alert1>;
>> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> };
>>
>> - cpu7-thermal {
>> + cpu_1_1-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> thermal-sensors = <&tsens0 10>;
>>
>> trips {
>> - cpu7_alert0: trip-point0 {
>> + cpu_1_1_alert0: trip-point0 {
>> temperature = <90000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu7_alert1: trip-point1 {
>> + cpu_1_1_alert1: trip-point1 {
>> temperature = <95000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu7_crit: cpu_crit {
>> + cpu_1_1_crit: cpu_crit {
>> temperature = <110000>;
>> hysteresis = <1000>;
>> type = "critical";
>> };
>> };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_1_1_alert0>;
>> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + map1 {
>> + trip = <&cpu_1_1_alert1>;
>> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> };
>>
>> - cpu8-thermal {
>> + cpu_1_2-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> thermal-sensors = <&tsens0 11>;
>>
>> trips {
>> - cpu8_alert0: trip-point0 {
>> + cpu_1_2_alert0: trip-point0 {
>> temperature = <90000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu8_alert1: trip-point1 {
>> + cpu_1_2_alert1: trip-point1 {
>> temperature = <95000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu8_crit: cpu_crit {
>> + cpu_1_2_crit: cpu_crit {
>> temperature = <110000>;
>> hysteresis = <1000>;
>> type = "critical";
>> };
>> };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_1_2_alert0>;
>> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + map1 {
>> + trip = <&cpu_1_2_alert1>;
>> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> };
>>
>> - cpu9-thermal {
>> + cpu_1_3-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> thermal-sensors = <&tsens0 12>;
>>
>> trips {
>> - cpu9_alert0: trip-point0 {
>> + cpu_1_3_alert0: trip-point0 {
>> temperature = <90000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu9_alert1: trip-point1 {
>> + cpu_1_3_alert1: trip-point1 {
>> temperature = <95000>;
>> hysteresis = <2000>;
>> type = "passive";
>> };
>>
>> - cpu9_crit: cpu_crit {
>> + cpu_1_3_crit: cpu_crit {
>> temperature = <110000>;
>> hysteresis = <1000>;
>> type = "critical";
>> };
>> };
>> +
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_1_3_alert0>;
>> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + map1 {
>> + trip = <&cpu_1_3_alert1>;
>> + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>> + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>> + };
>> + };
>> };
>>
>> - aoss0-thermal {
>> + aoss_0-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> @@ -1586,7 +1775,7 @@
>> };
>> };
>>
>> - cpuss0-thermal {
>> + cpuss_0-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> @@ -1606,7 +1795,7 @@
>> };
>> };
>>
>> - cpuss1-thermal {
>> + cpuss_1-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> @@ -1626,7 +1815,7 @@
>> };
>> };
>>
>> - gpuss0-thermal {
>> + gpuss_0-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> @@ -1641,7 +1830,7 @@
>> };
>> };
>>
>> - gpuss1-thermal {
>> + gpuss_1-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> @@ -1656,7 +1845,7 @@
>> };
>> };
>>
>> - aoss1-thermal {
>> + aoss_1-thermal {
>> polling-delay-passive = <250>;
>> polling-delay = <1000>;
>>
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
>> of Code Aurora Forum, hosted by The Linux Foundation
>>

\
 
 \ /
  Last update: 2019-12-27 11:57    [W:0.068 / U:6.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site