Messages in this thread |  | | From | Martin Blumenstingl <> | Subject | [PATCH 0/2] RTL8211F: RGMII RX/TX delay configuration improvements | Date | Thu, 26 Dec 2019 19:51:46 +0100 |
| |
In discussion with Andrew [0] we figured out that it would be best to make the RX delay of the RTL8211F PHY configurable (just like the TX delay is already configurable).
While here I took the opportunity to add some logging to the TX delay configuration as well.
There is no public documentation for the RX and TX delay registers. I received this information a while ago (and created this RfC patch back then: [1]). Realtek gave me permission to take the information from the datasheet extracts and phase them in my own words and publish that (I am not allowed to publish the datasheet extracts).
I have tested these patches on two boards: - Amlogic Meson8b Odroid-C1 - Amlogic GXM Khadas VIM2 Both still behave as before these changes (iperf3 speeds are the same in both directions: RX and TX), which is expected because they are currently using phy-mode = "rgmii" with the RX delay not being generated by the PHY.
[0] https://patchwork.ozlabs.org/patch/1215313/ [1] https://patchwork.ozlabs.org/patch/843946/
Martin Blumenstingl (2): net: phy: realtek: add logging for the RGMII TX delay configuration net: phy: realtek: add support for configuring the RX delay on RTL8211F
drivers/net/phy/realtek.c | 59 +++++++++++++++++++++++++++++++++------ 1 file changed, 51 insertions(+), 8 deletions(-)
-- 2.24.1
|  |