[lkml]   [2019]   [Dec]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/6] leds: lm3692x: Allow to set ovp and brigthness mode
Overvoltage protection and brightness mode are currently hardcoded
as 29V and disabled in the driver. Make these configurable via DT.

Besides addressing review comments v2 also allows to limit the maximum led

Changes from v1
- As per review comments by Dan Murphy
- Split commits per propoerty
- Add new properties to DT example too
- Drop dev_dbg() statements
- ovp: fix 21V value parsing
- ovp: Set correct default value if DT parsing fails
- As per review comments by Pavel Machek
- Fix defaults (which is 29V)
- Use uV as Unit for ovp property
- Change property name to 'ti,ovp-microvolt' to make it shorter
- Honor led-max-microamp to not exceed the maximum led current

To: Jacek Anaszewski <>,Pavel Machek <>,Dan Murphy <>,Rob Herring <>,Mark Rutland <>,,,

Guido Günther (6):
dt: bindings: lm3692x: Add ti,ovp-microvolt property
leds: lm3692x: Allow to configure over voltage protection
dt: bindings: lm3692x: Add ti,brightness-mapping-exponential property
leds: lm3692x: Allow to configure brigthness mode
dt: bindings: lm3692x: Add led-max-microamp property
leds: lm3692x: Make sure we don't exceed the maximum led current

.../devicetree/bindings/leds/leds-lm3692x.txt | 11 +++
drivers/leds/leds-lm3692x.c | 67 +++++++++++++++++--
2 files changed, 72 insertions(+), 6 deletions(-)


 \ /
  Last update: 2019-12-25 12:08    [W:0.079 / U:1.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site