lkml.org 
[lkml]   [2019]   [Dec]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/6] leds: lm3692x: Allow to configure over voltage protection
Date
Overvoltage protection is currently using the default of 29V.  Make it
configurable via DT.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
drivers/leds/leds-lm3692x.c | 34 ++++++++++++++++++++++++++++++----
1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c
index 8b408102e138..28973cc5a6cc 100644
--- a/drivers/leds/leds-lm3692x.c
+++ b/drivers/leds/leds-lm3692x.c
@@ -114,6 +114,8 @@ struct lm3692x_led {
struct regulator *regulator;
int led_enable;
int model_id;
+
+ u8 boost_ctrl;
};

static const struct reg_default lm3692x_reg_defs[] = {
@@ -249,10 +251,7 @@ static int lm3692x_init(struct lm3692x_led *led)
if (ret)
goto out;

- ret = regmap_write(led->regmap, LM3692X_BOOST_CTRL,
- LM3692X_BOOST_SW_1MHZ |
- LM3692X_BOOST_SW_NO_SHIFT |
- LM3692X_OCP_PROT_1_5A);
+ ret = regmap_write(led->regmap, LM3692X_BOOST_CTRL, led->boost_ctrl);
if (ret)
goto out;

@@ -326,6 +325,7 @@ static int lm3692x_probe_dt(struct lm3692x_led *led)
{
struct fwnode_handle *child = NULL;
struct led_init_data init_data = {};
+ u32 ovp;
int ret;

led->enable_gpio = devm_gpiod_get_optional(&led->client->dev,
@@ -350,6 +350,32 @@ static int lm3692x_probe_dt(struct lm3692x_led *led)
led->regulator = NULL;
}

+ led->boost_ctrl = LM3692X_BOOST_SW_1MHZ |
+ LM3692X_BOOST_SW_NO_SHIFT |
+ LM3692X_OCP_PROT_1_5A;
+ ret = device_property_read_u32(&led->client->dev,
+ "ti,ovp-microvolt", &ovp);
+ if (ret) {
+ led->boost_ctrl |= LM3692X_OVP_29V;
+ } else {
+ switch (ovp) {
+ case 17000000:
+ break;
+ case 21000000:
+ led->boost_ctrl |= LM3692X_OVP_21V;
+ break;
+ case 25000000:
+ led->boost_ctrl |= LM3692X_OVP_25V;
+ break;
+ case 29000000:
+ led->boost_ctrl |= LM3692X_OVP_29V;
+ break;
+ default:
+ dev_err(&led->client->dev, "Invalid OVP %d\n", ovp);
+ return -EINVAL;
+ }
+ }
+
child = device_get_next_child_node(&led->client->dev, child);
if (!child) {
dev_err(&led->client->dev, "No LED Child node\n");
--
2.23.0
\
 
 \ /
  Last update: 2019-12-25 12:08    [W:0.051 / U:19.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site