lkml.org 
[lkml]   [2019]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] ARM: dts: meson8: use the actual frequency for the GPU's 182.1MHz OPP
Date
The clock setup on Meson8 cannot achieve a Mali frequency of exactly
182.15MHz. The vendor driver uses "FCLK_DIV7 / 2" for this frequency,
which translates to 2550MHz / 7 / 2 = 182142857Hz.
Update the GPU operating point to that specific frequency to not confuse
myself when comparing the frequency from the .dts with the actual clock
rate on the system.

Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm/boot/dts/meson8.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index b35d7444c1f4..eedb92526968 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -130,8 +130,8 @@ opp-1992000000 {
gpu_opp_table: gpu-opp-table {
compatible = "operating-points-v2";

- opp-182150000 {
- opp-hz = /bits/ 64 <182150000>;
+ opp-182142857 {
+ opp-hz = /bits/ 64 <182142857>;
opp-microvolt = <1150000>;
};
opp-318750000 {
--
2.24.1
\
 
 \ /
  Last update: 2019-12-25 02:07    [W:0.035 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site