lkml.org 
[lkml]   [2019]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/4] ARM: dts: imx: Add GW5910 board support
On Mon, Dec 23, 2019 at 6:44 PM Robert Jones <rjones@gateworks.com> wrote:
>
> From: Tim Harvey <tharvey@gateworks.com>
>
> The Gateworks GW5910 is an IMX6 SoC based single board computer with:
> - IMX6Q or IMX6DL
> - 32bit DDR3 DRAM
> - FEC GbE RJ45 front-panel
> - 1x miniPCIe socket with PCI Gen2, USB2
> - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM
> - 5V to 60V DC input barrel jack
> - 3axis accelerometer (lis2de12)
> - GPS (ublox ZOE-M8Q)
> - bi-color front-panel LED
> - 256MB NAND boot device
> - microSD socket (with UHS-I support)
> - user pushbutton
> - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
> - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6)
> - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6)
> - RS232 transceiver (1x UART with flow-control or 2x UART (build option)
> - off-board SPI connector (1x chip-select)
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Ok, this one has Tim as the author, but since you are submitting it,
you should also add your Signed-off-by below Tim's.

\
 
 \ /
  Last update: 2019-12-23 23:08    [W:0.044 / U:6.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site