lkml.org 
[lkml]   [2019]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 09/12] dmaengine: ti: New driver for K3 UDMA
On 09-12-19, 11:43, Peter Ujfalusi wrote:

> +#include <linux/kernel.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dmapool.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/of.h>
> +#include <linux/of_dma.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>

to many of headers, do we need all!

> +static char *udma_get_dir_text(enum dma_transfer_direction dir)
> +{
> + switch (dir) {
> + case DMA_DEV_TO_MEM:
> + return "DEV_TO_MEM";
> + case DMA_MEM_TO_DEV:
> + return "MEM_TO_DEV";
> + case DMA_MEM_TO_MEM:
> + return "MEM_TO_MEM";
> + case DMA_DEV_TO_DEV:
> + return "DEV_TO_DEV";
> + default:
> + break;
> + }
> +
> + return "invalid";
> +}

this seems generic which other ppl may need, can we move it to core.

> +
> +static void udma_reset_uchan(struct udma_chan *uc)
> +{
> + uc->state = UDMA_CHAN_IS_IDLE;
> + uc->remote_thread_id = -1;
> + uc->dir = DMA_MEM_TO_MEM;
> + uc->pkt_mode = false;
> + uc->ep_type = PSIL_EP_NATIVE;
> + uc->enable_acc32 = 0;
> + uc->enable_burst = 0;
> + uc->channel_tpl = 0;
> + uc->psd_size = 0;
> + uc->metadata_size = 0;
> + uc->hdesc_size = 0;
> + uc->notdpkt = 0;

rather than do setting zero, why note memset and then set the nonzero
members only?

> +static void udma_reset_counters(struct udma_chan *uc)
> +{
> + u32 val;
> +
> + if (uc->tchan) {
> + val = udma_tchanrt_read(uc->tchan, UDMA_TCHAN_RT_BCNT_REG);
> + udma_tchanrt_write(uc->tchan, UDMA_TCHAN_RT_BCNT_REG, val);

so you read back from UDMA_TCHAN_RT_BCNT_REG and write same value to
it??

> +
> + val = udma_tchanrt_read(uc->tchan, UDMA_TCHAN_RT_SBCNT_REG);
> + udma_tchanrt_write(uc->tchan, UDMA_TCHAN_RT_SBCNT_REG, val);
> +
> + val = udma_tchanrt_read(uc->tchan, UDMA_TCHAN_RT_PCNT_REG);
> + udma_tchanrt_write(uc->tchan, UDMA_TCHAN_RT_PCNT_REG, val);
> +
> + val = udma_tchanrt_read(uc->tchan, UDMA_TCHAN_RT_PEER_BCNT_REG);
> + udma_tchanrt_write(uc->tchan, UDMA_TCHAN_RT_PEER_BCNT_REG, val);
> + }
> +
> + if (uc->rchan) {
> + val = udma_rchanrt_read(uc->rchan, UDMA_RCHAN_RT_BCNT_REG);
> + udma_rchanrt_write(uc->rchan, UDMA_RCHAN_RT_BCNT_REG, val);
> +
> + val = udma_rchanrt_read(uc->rchan, UDMA_RCHAN_RT_SBCNT_REG);
> + udma_rchanrt_write(uc->rchan, UDMA_RCHAN_RT_SBCNT_REG, val);
> +
> + val = udma_rchanrt_read(uc->rchan, UDMA_RCHAN_RT_PCNT_REG);
> + udma_rchanrt_write(uc->rchan, UDMA_RCHAN_RT_PCNT_REG, val);
> +
> + val = udma_rchanrt_read(uc->rchan, UDMA_RCHAN_RT_PEER_BCNT_REG);
> + udma_rchanrt_write(uc->rchan, UDMA_RCHAN_RT_PEER_BCNT_REG, val);

True for all of these, what am I missing :)

> +static int udma_start(struct udma_chan *uc)
> +{
> + struct virt_dma_desc *vd = vchan_next_desc(&uc->vc);
> +
> + if (!vd) {
> + uc->desc = NULL;
> + return -ENOENT;
> + }
> +
> + list_del(&vd->node);
> +
> + uc->desc = to_udma_desc(&vd->tx);
> +
> + /* Channel is already running and does not need reconfiguration */
> + if (udma_is_chan_running(uc) && !udma_chan_needs_reconfiguration(uc)) {
> + udma_start_desc(uc);
> + goto out;

How about the case where settings are different than the current one?

> +static struct udma_desc *udma_alloc_tr_desc(struct udma_chan *uc,
> + size_t tr_size, int tr_count,
> + enum dma_transfer_direction dir)
> +{
> + struct udma_hwdesc *hwdesc;
> + struct cppi5_desc_hdr_t *tr_desc;
> + struct udma_desc *d;
> + u32 reload_count = 0;
> + u32 ring_id;
> +
> + switch (tr_size) {
> + case 16:
> + case 32:
> + case 64:
> + case 128:
> + break;
> + default:
> + dev_err(uc->ud->dev, "Unsupported TR size of %zu\n", tr_size);
> + return NULL;
> + }
> +
> + /* We have only one descriptor containing multiple TRs */
> + d = kzalloc(sizeof(*d) + sizeof(d->hwdesc[0]), GFP_ATOMIC);

this is invoked from prep_ so should use GFP_NOWAIT, we dont use
GFP_ATOMIC :)

> +static struct udma_desc *
> +udma_prep_slave_sg_tr(struct udma_chan *uc, struct scatterlist *sgl,
> + unsigned int sglen, enum dma_transfer_direction dir,
> + unsigned long tx_flags, void *context)
> +{
> + enum dma_slave_buswidth dev_width;
> + struct scatterlist *sgent;
> + struct udma_desc *d;
> + size_t tr_size;
> + struct cppi5_tr_type1_t *tr_req = NULL;
> + unsigned int i;
> + u32 burst;
> +
> + if (dir == DMA_DEV_TO_MEM) {
> + dev_width = uc->cfg.src_addr_width;
> + burst = uc->cfg.src_maxburst;
> + } else if (dir == DMA_MEM_TO_DEV) {
> + dev_width = uc->cfg.dst_addr_width;
> + burst = uc->cfg.dst_maxburst;
> + } else {
> + dev_err(uc->ud->dev, "%s: bad direction?\n", __func__);
> + return NULL;
> + }
> +
> + if (!burst)
> + burst = 1;
> +
> + /* Now allocate and setup the descriptor. */
> + tr_size = sizeof(struct cppi5_tr_type1_t);
> + d = udma_alloc_tr_desc(uc, tr_size, sglen, dir);
> + if (!d)
> + return NULL;
> +
> + d->sglen = sglen;
> +
> + tr_req = (struct cppi5_tr_type1_t *)d->hwdesc[0].tr_req_base;

cast away from void *?

> +static int udma_configure_statictr(struct udma_chan *uc, struct udma_desc *d,
> + enum dma_slave_buswidth dev_width,
> + u16 elcnt)
> +{
> + if (uc->ep_type != PSIL_EP_PDMA_XY)
> + return 0;
> +
> + /* Bus width translates to the element size (ES) */
> + switch (dev_width) {
> + case DMA_SLAVE_BUSWIDTH_1_BYTE:
> + d->static_tr.elsize = 0;
> + break;
> + case DMA_SLAVE_BUSWIDTH_2_BYTES:
> + d->static_tr.elsize = 1;
> + break;
> + case DMA_SLAVE_BUSWIDTH_3_BYTES:
> + d->static_tr.elsize = 2;
> + break;
> + case DMA_SLAVE_BUSWIDTH_4_BYTES:
> + d->static_tr.elsize = 3;
> + break;
> + case DMA_SLAVE_BUSWIDTH_8_BYTES:
> + d->static_tr.elsize = 4;

seems like ffs(dev_width) to me?

> +static struct udma_desc *
> +udma_prep_slave_sg_pkt(struct udma_chan *uc, struct scatterlist *sgl,
> + unsigned int sglen, enum dma_transfer_direction dir,
> + unsigned long tx_flags, void *context)
> +{
> + struct scatterlist *sgent;
> + struct cppi5_host_desc_t *h_desc = NULL;
> + struct udma_desc *d;
> + u32 ring_id;
> + unsigned int i;
> +
> + d = kzalloc(sizeof(*d) + sglen * sizeof(d->hwdesc[0]), GFP_ATOMIC);

GFP_NOWAIT here and few other places

> +static struct udma_desc *
> +udma_prep_dma_cyclic_pkt(struct udma_chan *uc, dma_addr_t buf_addr,
> + size_t buf_len, size_t period_len,
> + enum dma_transfer_direction dir, unsigned long flags)
> +{
> + struct udma_desc *d;
> + u32 ring_id;
> + int i;
> + int periods = buf_len / period_len;
> +
> + if (periods > (K3_UDMA_DEFAULT_RING_SIZE - 1))
> + return NULL;
> +
> + if (period_len > 0x3FFFFF)

Magic?

> +static enum dma_status udma_tx_status(struct dma_chan *chan,
> + dma_cookie_t cookie,
> + struct dma_tx_state *txstate)
> +{
> + struct udma_chan *uc = to_udma_chan(chan);
> + enum dma_status ret;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&uc->vc.lock, flags);
> +
> + ret = dma_cookie_status(chan, cookie, txstate);
> +
> + if (!udma_is_chan_running(uc))
> + ret = DMA_COMPLETE;

Even for paused, not started channel? Not sure what will be return on those cases
--
~Vinod

\
 
 \ /
  Last update: 2019-12-23 08:35    [W:0.146 / U:3.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site