lkml.org 
[lkml]   [2019]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] ath10k: Enable QDSS clock on sm8150
Date
On SM8150 the WiFi firmware depends on the QDSS clock ticking, or the system
will reset due to an NoC error. So this adds an optional clock to the ath10k
binding and makes sure it's enabled while the WiFi firmware needs it.

Bjorn Andersson (2):
ath10k: Add optional qdss clk
arm64: dts: qcom: sm8150: Specify qdss clock for wifi

.../devicetree/bindings/net/wireless/qcom,ath10k.txt | 2 +-
arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
drivers/net/wireless/ath/ath10k/snoc.c | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)

--
2.24.0

\
 
 \ /
  Last update: 2019-12-23 06:50    [W:0.065 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site