lkml.org 
[lkml]   [2019]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 16/18] dmaengine: ti: k3-udma: Allow the driver to be built as module
Date
The ring accelerator driver can be built as module since all depending
functions are exported.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/dma/ti/Kconfig | 2 +-
drivers/dma/ti/k3-udma.c | 29 +++++++++++++++++++++++++++--
2 files changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
index f76e06651f80..beb000be7d1b 100644
--- a/drivers/dma/ti/Kconfig
+++ b/drivers/dma/ti/Kconfig
@@ -35,7 +35,7 @@ config DMA_OMAP
DMA engine is found on OMAP and DRA7xx parts.

config TI_K3_UDMA
- bool "Texas Instruments UDMA support"
+ tristate "Texas Instruments UDMA support"
depends on ARCH_K3 || COMPILE_TEST
depends on TI_SCI_PROTOCOL
depends on TI_SCI_INTA_IRQCHIP
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index c97c5f6f1e29..dbed2205065a 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/list.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -3088,6 +3089,7 @@ static const struct of_device_id udma_of_match[] = {
},
{ /* Sentinel */ },
};
+MODULE_DEVICE_TABLE(of, udma_of_match);

static int udma_get_mmrs(struct platform_device *pdev, struct udma_dev *ud)
{
@@ -3426,15 +3428,38 @@ static int udma_probe(struct platform_device *pdev)
return ret;
}

+static int udma_remove(struct platform_device *pdev)
+{
+ struct udma_dev *ud = platform_get_drvdata(pdev);
+ struct udma_chan *uc;
+
+ list_for_each_entry(uc, &ud->ddev.channels, vc.chan.device_node)
+ tasklet_kill(&uc->vc.task);
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&ud->ddev);
+
+ /* Make sure that we did proper cleanup */
+ cancel_work_sync(&ud->purge_work);
+ udma_purge_desc_work(&ud->purge_work);
+
+ return 0;
+}
+
static struct platform_driver udma_driver = {
.driver = {
.name = "ti-udma",
.of_match_table = udma_of_match,
- .suppress_bind_attrs = true,
},
.probe = udma_probe,
+ .remove = udma_remove,
};
-builtin_platform_driver(udma_driver);
+module_platform_driver(udma_driver);

/* Private interfaces to UDMA */
#include "k3-udma-private.c"
+
+MODULE_ALIAS("platform:ti-udma");
+MODULE_DESCRIPTION("TI K3 DMA driver for CPPI 5.0 compliant devices");
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_LICENSE("GPL v2");
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-12-23 12:06    [W:0.075 / U:8.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site