lkml.org 
[lkml]   [2019]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Ocfs2-devel] [PATCH v3] ocfs2: call journal flush to mark journal as empty after journal recovery when mount
From
Date


On 12/20/19 8:52 PM, Jiangyiwen wrote:
> On 2019/12/20 17:33, Likai wrote:
>> On 2019/12/20 17:14, piaojun wrote:
>>> On 2019/12/20 9:11, Joseph Qi wrote:
>>>> On 19/12/19 22:15, piaojun wrote:
>>>>> On 2019/12/17 10:01, Kai Li wrote:
>>>>>> If journal is dirty when mount, it will be replayed but jbd2 sb
>>>>>> log tail cannot be updated to mark a new start because
>>>>>> journal->j_flag has already been set with JBD2_ABORT first
>>>>>> in journal_init_common. When a new transaction is committed, it
>>>>>> will be recored in block 1 first(journal->j_tail is set to 1 in
>>>>>> journal_reset).If emergency restart happens again before journal
>>>>>> super block is updated unfortunately, the new recorded trans will
>>>>>> not be replayed in the next mount.
>>>>>>
>>>>>> The following steps describe this procedure in detail.
>>>>>> 1. mount and touch some files
>>>>>> 2. these transactions are committed to journal area but not
>>>>>> checkpointed
>>>>>> 3. emergency restart
>>>>>> 4. mount again and its journals are replayed
>>>>>> 5. journal super block's first s_start is 1, but its s_seq is not
>>>>>> updated
>>>>>> 6. touch a new file and its trans is committed but not checkpointed
>
> Hi,
>
> I wonder that in this step, does the function
> jbd2_journal_commit_transaction() return?
> I understand only jbd2_journal_commit_transaction() return it means the
> transaction
> is committed completely, and the s_seq can be updated in
> jbd2_journal_commit_transaction()->jbd2_update_log_tail(), so I don't
> know how
> this scenario happened.
>
> If emergency restart happens in before jbd2_journal_commit_transaction()

The trick is that jbd2 kernel thread even doesn't have a chance to to
update tail. Assuming that a timepoint sits between *mount completion*
and the *first iteration* of committing work that jbd2 thread.

-Changwei

> return,
> I think this transaction shouldn't be a valid transaction.
>
> Can you explain where the specific function is executed?
>
> Thanks,
> Yiwen.
>
>>>>>> 7. emergency restart again
>>>>>> 8. mount and journal is dirty, but trans committed in 6 will not be
>>>>>> replayed.
>>>>>>
>>>>>> This exception happens easily when this lun is used by only one
>>>>>> node. If it
>>>>>> is used by multi-nodes, other node will replay its journal and its
>>>>>> journal super block will be updated after recovery like what this
>>>>>> patch
>>>>>> does.
>>>>>>
>>>>>> ocfs2_recover_node->ocfs2_replay_journal.
>>>>>>
>>>>>> The following jbd2 journal can be generated by touching a new file
>>>>>> after
>>>>>> journal is replayed, and seq 15 is the first valid commit, but
>>>>>> first seq
>>>>>> is 13 in journal super block.
>>>>>> logdump:
>>>>>> Block 0: Journal Superblock
>>>>>> Seq: 0   Type: 4 (JBD2_SUPERBLOCK_V2)
>>>>>> Blocksize: 4096   Total Blocks: 32768   First Block: 1
>>>>>> First Commit ID: 13   Start Log Blknum: 1
>>>>>> Error: 0
>>>>>> Feature Compat: 0
>>>>>> Feature Incompat: 2 block64
>>>>>> Feature RO compat: 0
>>>>>> Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36
>>>>>> FS Share Cnt: 1   Dynamic Superblk Blknum: 0
>>>>>> Per Txn Block Limit    Journal: 0    Data: 0
>>>>>>
>>>>>> Block 1: Journal Commit Block
>>>>>> Seq: 14   Type: 2 (JBD2_COMMIT_BLOCK)
>>>>>>
>>>>>> Block 2: Journal Descriptor
>>>>>> Seq: 15   Type: 1 (JBD2_DESCRIPTOR_BLOCK)
>>>>>> No. Blocknum        Flags
>>>>>>   0. 587             none
>>>>>> UUID: 00000000000000000000000000000000
>>>>>>   1. 8257792         JBD2_FLAG_SAME_UUID
>>>>>>   2. 619             JBD2_FLAG_SAME_UUID
>>>>>>   3. 24772864        JBD2_FLAG_SAME_UUID
>>>>>>   4. 8257802         JBD2_FLAG_SAME_UUID
>>>>>>   5. 513             JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG
>>>>>> ...
>>>>>> Block 7: Inode
>>>>>> Inode: 8257802   Mode: 0640   Generation: 57157641 (0x3682809)
>>>>>> FS Generation: 2839773110 (0xa9437fb6)
>>>>>> CRC32: 00000000   ECC: 0000
>>>>>> Type: Regular   Attr: 0x0   Flags: Valid
>>>>>> Dynamic Features: (0x1) InlineData
>>>>>> User: 0 (root)   Group: 0 (root)   Size: 7
>>>>>> Links: 1   Clusters: 0
>>>>>> ctime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
>>>>>> atime: 0x5de5d870 0x113181a1 -- Tue Dec  3 11:37:20.288457121 2019
>>>>>> mtime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
>>>>>> dtime: 0x0 -- Thu Jan  1 08:00:00 1970
>>>>>> ...
>>>>>> Block 9: Journal Commit Block
>>>>>> Seq: 15   Type: 2 (JBD2_COMMIT_BLOCK)
>>>>>>
>>>>>> The following is jouranl recovery log when recovering the upper jbd2
>>>>>> journal when mount again.
>>>>>> syslog:
>>>>>> [ 2265.648622] ocfs2: File system on device (252,1) was not
>>>>>> unmounted cleanly, recovering it.
>>>>>> [ 2265.649695] fs/jbd2/recovery.c:(do_one_pass, 449): Starting
>>>>>> recovery pass 0
>>>>>> [ 2265.650407] fs/jbd2/recovery.c:(do_one_pass, 449): Starting
>>>>>> recovery pass 1
>>>>>> [ 2265.650409] fs/jbd2/recovery.c:(do_one_pass, 449): Starting
>>>>>> recovery pass 2
>>>>>> [ 2265.650410] fs/jbd2/recovery.c:(jbd2_journal_recover, 278):
>>>>>> JBD2: recovery, exit status 0, recovered transactions 13 to 13
>>>>>>
>>>>>> Due to first commit seq 13 recorded in journal super is not
>>>>>> consistent
>>>>>> with the value recorded in block 1(seq is 14), journal recovery
>>>>>> will be
>>>>>> terminated before seq 15 even though it is an unbroken commit, inode
>>>>>> 8257802 is a new file and it will be lost.
>>>>>>
>>>>>> Signed-off-by: Kai Li <li.kai4@h3c.com>
>>>>>> ---
>>>>>>   fs/ocfs2/journal.c | 8 ++++++++
>>>>>>   1 file changed, 8 insertions(+)
>>>>>>
>>>>>> diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
>>>>>> index 1afe57f425a0..68ba354cf361 100644
>>>>>> --- a/fs/ocfs2/journal.c
>>>>>> +++ b/fs/ocfs2/journal.c
>>>>>> @@ -1066,6 +1066,14 @@ int ocfs2_journal_load(struct ocfs2_journal
>>>>>> *journal, int local, int replayed)
>>>>>>       ocfs2_clear_journal_error(osb->sb, journal->j_journal,
>>>>>> osb->slot_num);
>>>>>> +    if (replayed) {
>>>>>> +        jbd2_journal_lock_updates(journal->j_journal);
>>>>>> +        status = jbd2_journal_flush(journal->j_journal);
>>>>> What if jbd2_journal_flush gets failed? The 's_sequence' and 's_start'
>>>>> won't be reset, and I wonder if the problem still remains.
>>>>>
>>>> Yes, but we don't want this to fail the mount process, instead we
>>>> just log
>>>> an error and system administrator should know the result.
>>>>
>>> Thanks for your reply and I have another question about this issue. IMO
>>> the second trans is not complete as jbd2 sb has not been updated, so we
>>> do not need to replay it when mount again.
>>>
>>> Jun
>>>
>>>
>> I don't think so. The problem is that jbd2 sb should be updated to mark
>> a new start after mount rather than whether trans committed later is
>> complete or not.
>>
>> In fact , the trans is complete too as the commit log described.
>>
>> Thanks
>>
>>
>> _______________________________________________
>> Ocfs2-devel mailing list
>> Ocfs2-devel@oss.oracle.com
>> https://oss.oracle.com/mailman/listinfo/ocfs2-devel
>>
>> .
>>
>

\
 
 \ /
  Last update: 2019-12-21 08:27    [W:0.052 / U:24.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site