lkml.org 
[lkml]   [2019]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] USB: EHCI: ehci-mv: add HSIC support
Date
Some special dance is needed to initialize the HSIC port.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
drivers/usb/host/ehci-mv.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 66ec1fdf9fe7d..21eb32baf9380 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -11,6 +11,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/usb/otg.h>
+#include <linux/usb/of.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/io.h>

@@ -67,6 +68,8 @@ static int mv_ehci_reset(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
struct ehci_hcd_mv *ehci_mv = hcd_to_ehci_hcd_mv(hcd);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 status;
int retval;

if (ehci_mv == NULL) {
@@ -80,6 +83,14 @@ static int mv_ehci_reset(struct usb_hcd *hcd)
if (retval)
dev_err(dev, "ehci_setup failed %d\n", retval);

+ if (of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC) {
+ status = ehci_readl(ehci, &ehci->regs->port_status[0]);
+ status |= PORT_TEST_FORCE;
+ ehci_writel(ehci, status, &ehci->regs->port_status[0]);
+ status &= ~PORT_TEST_FORCE;
+ ehci_writel(ehci, status, &ehci->regs->port_status[0]);
+ }
+
return retval;
}

--
2.24.1
\
 
 \ /
  Last update: 2019-12-21 07:52    [W:0.032 / U:32.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site