lkml.org 
[lkml]   [2019]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 3/3] drm/panel: add panel driver for Xinpeng XPP055C272 panels
Date
Hi Sam,

Am Dienstag, 17. Dezember 2019, 23:29:06 CET schrieb Heiko Stuebner:
> From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
>
> Base on the somewhat similar Rocktech driver but adapted for
> panel-specific init of the XPP055C272.
>
> changes in v3:
> - remove wrong negative sync flags from display-mode to fix a display
> artifact of the output getting move a tiny bit to the right
> changes in v2:
> - move to drm-panel-internal backlight handling (Sam)
> - adapt to changes that happened to drm_panel structs+functions (Sam)
> - sort includes (Sam)
> - drop unnecessary DRV_NAME constant (Sam)
> - do mipi_dsi_dcs_exit_sleep_mode and mipi_dsi_dcs_set_display_on
> in panel prepare (not init_sequence) to keep symmetric (Sam)
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>

are you satisfied with the changes, requested last weekend?

Thanks
Heiko

> ---
> drivers/gpu/drm/panel/Kconfig | 10 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-xinpeng-xpp055c272.c | 400 ++++++++++++++++++
> 3 files changed, 411 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index f152bc4eeb53..fb1ded47677e 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -355,4 +355,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
> help
> Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
> Video Mode panel
> +
> +config DRM_PANEL_XINPENG_XPP055C272
> + tristate "Xinpeng XPP055C272 panel driver"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for the Xinpeng
> + XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
> + system interfaces.
> endmenu
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index b6cd39fe0f20..71d7722146a7 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -38,3 +38,4 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
> obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
> obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
> obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
> +obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
> diff --git a/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c b/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
> new file mode 100644
> index 000000000000..1a7ded012344
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
> @@ -0,0 +1,400 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Xinpeng xpp055c272 5.5" MIPI-DSI panel driver
> + * Copyright (C) 2019 Theobroma Systems Design und Consulting GmbH
> + *
> + * based on
> + *
> + * Rockteck jh057n00900 5.5" MIPI-DSI panel driver
> + * Copyright (C) Purism SPC 2019
> + */
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
> +
> +#include <video/display_timing.h>
> +#include <video/mipi_display.h>
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/media-bus-format.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +/* Manufacturer specific Commands send via DSI */
> +#define XPP055C272_CMD_ALL_PIXEL_OFF 0x22
> +#define XPP055C272_CMD_ALL_PIXEL_ON 0x23
> +#define XPP055C272_CMD_SETDISP 0xb2
> +#define XPP055C272_CMD_SETRGBIF 0xb3
> +#define XPP055C272_CMD_SETCYC 0xb4
> +#define XPP055C272_CMD_SETBGP 0xb5
> +#define XPP055C272_CMD_SETVCOM 0xb6
> +#define XPP055C272_CMD_SETOTP 0xb7
> +#define XPP055C272_CMD_SETPOWER_EXT 0xb8
> +#define XPP055C272_CMD_SETEXTC 0xb9
> +#define XPP055C272_CMD_SETMIPI 0xbA
> +#define XPP055C272_CMD_SETVDC 0xbc
> +#define XPP055C272_CMD_SETPCR 0xbf
> +#define XPP055C272_CMD_SETSCR 0xc0
> +#define XPP055C272_CMD_SETPOWER 0xc1
> +#define XPP055C272_CMD_SETECO 0xc6
> +#define XPP055C272_CMD_SETPANEL 0xcc
> +#define XPP055C272_CMD_SETGAMMA 0xe0
> +#define XPP055C272_CMD_SETEQ 0xe3
> +#define XPP055C272_CMD_SETGIP1 0xe9
> +#define XPP055C272_CMD_SETGIP2 0xea
> +
> +struct xpp055c272 {
> + struct device *dev;
> + struct drm_panel panel;
> + struct gpio_desc *reset_gpio;
> + struct regulator *vci;
> + struct regulator *iovcc;
> + bool prepared;
> +};
> +
> +static inline struct xpp055c272 *panel_to_xpp055c272(struct drm_panel *panel)
> +{
> + return container_of(panel, struct xpp055c272, panel);
> +}
> +
> +#define dsi_generic_write_seq(dsi, cmd, seq...) do { \
> + static const u8 d[] = { seq }; \
> + int ret; \
> + ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
> + if (ret < 0) \
> + return ret; \
> + } while (0)
> +
> +static int xpp055c272_init_sequence(struct xpp055c272 *ctx)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + struct device *dev = ctx->dev;
> +
> + /*
> + * Init sequence was supplied by the panel vendor without much
> + * documentation.
> + */
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETEXTC, 0xf1, 0x12, 0x83);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETMIPI,
> + 0x33, 0x81, 0x05, 0xf9, 0x0e, 0x0e, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x44, 0x25,
> + 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02, 0x4f, 0x01,
> + 0x00, 0x00, 0x37);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPOWER_EXT, 0x25);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPCR, 0x02, 0x11, 0x00);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETRGBIF,
> + 0x0c, 0x10, 0x0a, 0x50, 0x03, 0xff, 0x00, 0x00,
> + 0x00, 0x00);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETSCR,
> + 0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
> + 0x00);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETVDC, 0x46);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPANEL, 0x0b);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETCYC, 0x80);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETDISP, 0xc8, 0x12, 0x30);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETEQ,
> + 0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
> + 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPOWER,
> + 0x53, 0x00, 0x1e, 0x1e, 0x77, 0xe1, 0xcc, 0xdd,
> + 0x67, 0x77, 0x33, 0x33);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETECO, 0x00, 0x00, 0xff,
> + 0xff, 0x01, 0xff);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETBGP, 0x09, 0x09);
> + msleep(20);
> +
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETVCOM, 0x87, 0x95);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGIP1,
> + 0xc2, 0x10, 0x05, 0x05, 0x10, 0x05, 0xa0, 0x12,
> + 0x31, 0x23, 0x3f, 0x81, 0x0a, 0xa0, 0x37, 0x18,
> + 0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x80,
> + 0x01, 0x00, 0x00, 0x00, 0x48, 0xf8, 0x86, 0x42,
> + 0x08, 0x88, 0x88, 0x80, 0x88, 0x88, 0x88, 0x58,
> + 0xf8, 0x87, 0x53, 0x18, 0x88, 0x88, 0x81, 0x88,
> + 0x88, 0x88, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGIP2,
> + 0x00, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x1f, 0x88, 0x81, 0x35,
> + 0x78, 0x88, 0x88, 0x85, 0x88, 0x88, 0x88, 0x0f,
> + 0x88, 0x80, 0x24, 0x68, 0x88, 0x88, 0x84, 0x88,
> + 0x88, 0x88, 0x23, 0x10, 0x00, 0x00, 0x1c, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x05,
> + 0xa0, 0x00, 0x00, 0x00, 0x00);
> + dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGAMMA,
> + 0x00, 0x06, 0x08, 0x2a, 0x31, 0x3f, 0x38, 0x36,
> + 0x07, 0x0c, 0x0d, 0x11, 0x13, 0x12, 0x13, 0x11,
> + 0x18, 0x00, 0x06, 0x08, 0x2a, 0x31, 0x3f, 0x38,
> + 0x36, 0x07, 0x0c, 0x0d, 0x11, 0x13, 0x12, 0x13,
> + 0x11, 0x18);
> +
> + msleep(60);
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
> + return 0;
> +}
> +
> +static int xpp055c272_unprepare(struct drm_panel *panel)
> +{
> + struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + if (!ctx->prepared)
> + return 0;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0)
> + DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n",
> + ret);
> +
> + mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n",
> + ret);
> + return ret;
> + }
> +
> + regulator_disable(ctx->iovcc);
> + regulator_disable(ctx->vci);
> +
> + ctx->prepared = false;
> +
> + return 0;
> +}
> +
> +static int xpp055c272_prepare(struct drm_panel *panel)
> +{
> + struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + if (ctx->prepared)
> + return 0;
> +
> + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
> + ret = regulator_enable(ctx->vci);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev,
> + "Failed to enable vci supply: %d\n", ret);
> + return ret;
> + }
> + ret = regulator_enable(ctx->iovcc);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev,
> + "Failed to enable iovcc supply: %d\n", ret);
> + goto disable_vci;
> + }
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + /* T6: 10us */
> + usleep_range(10, 20);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> +
> + /* T8: 20ms */
> + msleep(20);
> +
> + ret = xpp055c272_init_sequence(ctx);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
> + ret);
> + goto disable_iovcc;
> + }
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
> + goto disable_iovcc;
> + }
> +
> + /* T9: 120ms */
> + msleep(120);
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret);
> + goto disable_iovcc;
> + }
> +
> + msleep(50);
> +
> + ctx->prepared = true;
> +
> + return 0;
> +
> +disable_iovcc:
> + regulator_disable(ctx->iovcc);
> +disable_vci:
> + regulator_disable(ctx->vci);
> + return ret;
> +}
> +
> +static const struct drm_display_mode default_mode = {
> + .hdisplay = 720,
> + .hsync_start = 720 + 40,
> + .hsync_end = 720 + 40 + 10,
> + .htotal = 720 + 40 + 10 + 40,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 22,
> + .vsync_end = 1280 + 22 + 4,
> + .vtotal = 1280 + 22 + 4 + 11,
> + .vrefresh = 60,
> + .clock = 64000,
> + .width_mm = 68,
> + .height_mm = 121,
> +};
> +
> +static int xpp055c272_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev, &default_mode);
> + if (!mode) {
> + DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
> + default_mode.hdisplay, default_mode.vdisplay,
> + default_mode.vrefresh);
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + connector->display_info.width_mm = mode->width_mm;
> + connector->display_info.height_mm = mode->height_mm;
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs xpp055c272_funcs = {
> + .unprepare = xpp055c272_unprepare,
> + .prepare = xpp055c272_prepare,
> + .get_modes = xpp055c272_get_modes,
> +};
> +
> +static int xpp055c272_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct xpp055c272 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->reset_gpio)) {
> + DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
> + return PTR_ERR(ctx->reset_gpio);
> + }
> +
> + ctx->vci = devm_regulator_get(dev, "vci");
> + if (IS_ERR(ctx->vci)) {
> + ret = PTR_ERR(ctx->vci);
> + if (ret != -EPROBE_DEFER)
> + DRM_DEV_ERROR(dev,
> + "Failed to request vci regulator: %d\n",
> + ret);
> + return ret;
> + }
> +
> + ctx->iovcc = devm_regulator_get(dev, "iovcc");
> + if (IS_ERR(ctx->iovcc)) {
> + ret = PTR_ERR(ctx->iovcc);
> + if (ret != -EPROBE_DEFER)
> + DRM_DEV_ERROR(dev,
> + "Failed to request iovcc regulator: %d\n",
> + ret);
> + return ret;
> + }
> +
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + ctx->dev = dev;
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
> +
> + drm_panel_init(&ctx->panel, &dsi->dev, &xpp055c272_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + ret = drm_panel_of_backlight(&ctx->panel);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "Failed to find backlight: %d\n", ret);
> + return ret;
> + }
> +
> + drm_panel_add(&ctx->panel);
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
> + drm_panel_remove(&ctx->panel);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void xpp055c272_shutdown(struct mipi_dsi_device *dsi)
> +{
> + struct xpp055c272 *ctx = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = drm_panel_unprepare(&ctx->panel);
> + if (ret < 0)
> + DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
> + ret);
> +
> + ret = drm_panel_disable(&ctx->panel);
> + if (ret < 0)
> + DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
> + ret);
> +}
> +
> +static int xpp055c272_remove(struct mipi_dsi_device *dsi)
> +{
> + struct xpp055c272 *ctx = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + xpp055c272_shutdown(dsi);
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
> + ret);
> +
> + drm_panel_remove(&ctx->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id xpp055c272_of_match[] = {
> + { .compatible = "xinpeng,xpp055c272" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, xpp055c272_of_match);
> +
> +static struct mipi_dsi_driver xpp055c272_driver = {
> + .driver = {
> + .name = "panel-xinpeng-xpp055c272",
> + .of_match_table = xpp055c272_of_match,
> + },
> + .probe = xpp055c272_probe,
> + .remove = xpp055c272_remove,
> + .shutdown = xpp055c272_shutdown,
> +};
> +module_mipi_dsi_driver(xpp055c272_driver);
> +
> +MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
> +MODULE_DESCRIPTION("DRM driver for Xinpeng xpp055c272 MIPI DSI panel");
> +MODULE_LICENSE("GPL v2");
>




\
 
 \ /
  Last update: 2019-12-20 23:30    [W:0.065 / U:4.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site