lkml.org 
[lkml]   [2019]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv3 02/15] remoteproc/omap: Add device tree support
From
Date
On 20/12/2019 04:08, Suman Anna wrote:
> Hi Tero, Mathieu,
>
> On 12/19/19 5:54 AM, Tero Kristo wrote:
>> On 18/12/2019 01:01, Mathieu Poirier wrote:
>>> Hi Tero,
>>>
>>> On Fri, Dec 13, 2019 at 02:55:24PM +0200, Tero Kristo wrote:
>>>> From: Suman Anna <s-anna@ti.com>
>>>>
>>>> OMAP4+ SoCs support device tree boot only. The OMAP remoteproc
>>>> driver is enhanced to support remoteproc devices created through
>>>> Device Tree, support for legacy platform devices has been
>>>> deprecated. The current DT support handles the IPU and DSP
>>>> processor subsystems on OMAP4 and OMAP5 SoCs.
>>>>
>>>> The OMAP remoteproc driver relies on the ti-sysc, reset, and
>>>> syscon layers for performing clock, reset and boot vector
>>>> management (DSP remoteprocs only) of the devices, but some of
>>>> these are limited only to the machine-specific layers
>>>> in arch/arm. The dependency against control module API for boot
>>>> vector management of the DSP remoteprocs has now been removed
>>>> with added logic to parse the boot register from the DT node
>>>> and program it appropriately directly within the driver.
>>>>
>>>> The OMAP remoteproc driver expects the firmware names to be
>>>> provided via device tree entries (firmware-name.) These are used
>>>> to load the proper firmware during boot of the remote processor.
>>>>
>>>> Cc: Tony Lindgren <tony@atomide.com>
>>>> Signed-off-by: Suman Anna <s-anna@ti.com>
>>>> [t-kristo@ti.com: converted to use ti-sysc framework]
>>>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>>>> ---
>>>>   drivers/remoteproc/omap_remoteproc.c | 191 +++++++++++++++++++++++----
>>>>   1 file changed, 168 insertions(+), 23 deletions(-)
>>>>
>>>> diff --git a/drivers/remoteproc/omap_remoteproc.c
>>>> b/drivers/remoteproc/omap_remoteproc.c
>>>> index 6398194075aa..558634624590 100644
>>>> --- a/drivers/remoteproc/omap_remoteproc.c
>>>> +++ b/drivers/remoteproc/omap_remoteproc.c
>>>> @@ -2,7 +2,7 @@
>>>>   /*
>>>>    * OMAP Remote Processor driver
>>>>    *
>>>> - * Copyright (C) 2011 Texas Instruments, Inc.
>>>> + * Copyright (C) 2011-2019 Texas Instruments Incorporated -
>>>> http://www.ti.com/
>>>>    * Copyright (C) 2011 Google, Inc.
>>>>    *
>>>>    * Ohad Ben-Cohen <ohad@wizery.com>
>>>> @@ -16,27 +16,53 @@
>>>>   #include <linux/kernel.h>
>>>>   #include <linux/module.h>
>>>>   #include <linux/err.h>
>>>> +#include <linux/of_device.h>
>>>>   #include <linux/platform_device.h>
>>>>   #include <linux/dma-mapping.h>
>>>>   #include <linux/remoteproc.h>
>>>>   #include <linux/mailbox_client.h>
>>>>   #include <linux/omap-mailbox.h>
>>>> -
>>>> -#include <linux/platform_data/remoteproc-omap.h>
>>>> +#include <linux/regmap.h>
>>>> +#include <linux/mfd/syscon.h>
>>>> +#include <linux/reset.h>
>>>>     #include "omap_remoteproc.h"
>>>>   #include "remoteproc_internal.h"
>>>>   +/**
>>>> + * struct omap_rproc_boot_data - boot data structure for the DSP
>>>> omap rprocs
>>>> + * @syscon: regmap handle for the system control configuration module
>>>> + * @boot_reg: boot register offset within the @syscon regmap
>>>> + */
>>>> +struct omap_rproc_boot_data {
>>>> +    struct regmap *syscon;
>>>> +    unsigned int boot_reg;
>>>> +};
>>>> +
>>>>   /**
>>>>    * struct omap_rproc - omap remote processor state
>>>>    * @mbox: mailbox channel handle
>>>>    * @client: mailbox client to request the mailbox channel
>>>> + * @boot_data: boot data structure for setting processor boot address
>>>>    * @rproc: rproc handle
>>>> + * @reset: reset handle
>>>>    */
>>>>   struct omap_rproc {
>>>>       struct mbox_chan *mbox;
>>>>       struct mbox_client client;
>>>> +    struct omap_rproc_boot_data *boot_data;
>>>>       struct rproc *rproc;
>>>> +    struct reset_control *reset;
>>>> +};
>>>> +
>>>> +/**
>>>> + * struct omap_rproc_dev_data - device data for the omap remote
>>>> processor
>>>> + * @device_name: device name of the remote processor
>>>> + * @has_bootreg: true if this remote processor has boot register
>>>> + */
>>>> +struct omap_rproc_dev_data {
>>>> +    const char *device_name;
>>>> +    bool has_bootreg;
>>>>   };
>>>>     /**
>>>> @@ -92,6 +118,21 @@ static void omap_rproc_kick(struct rproc *rproc,
>>>> int vqid)
>>>>               ret);
>>>>   }
>>>>   +/**
>>>> + * omap_rproc_write_dsp_boot_addr - set boot address for a DSP
>>>> remote processor
>>>> + * @rproc: handle of a remote processor
>>>> + *
>>>> + * Set boot address for a supported DSP remote processor.
>>>> + */
>>>> +static void omap_rproc_write_dsp_boot_addr(struct rproc *rproc)
>>>> +{
>>>> +    struct omap_rproc *oproc = rproc->priv;
>>>> +    struct omap_rproc_boot_data *bdata = oproc->boot_data;
>>>> +    u32 offset = bdata->boot_reg;
>>>> +
>>>> +    regmap_write(bdata->syscon, offset, rproc->bootaddr);
>>>> +}
>>>> +
>>>>   /*
>>>>    * Power up the remote processor.
>>>>    *
>>>> @@ -103,13 +144,11 @@ static int omap_rproc_start(struct rproc *rproc)
>>>>   {
>>>>       struct omap_rproc *oproc = rproc->priv;
>>>>       struct device *dev = rproc->dev.parent;
>>>> -    struct platform_device *pdev = to_platform_device(dev);
>>>> -    struct omap_rproc_pdata *pdata = pdev->dev.platform_data;
>>>>       int ret;
>>>>       struct mbox_client *client = &oproc->client;
>>>>   -    if (pdata->set_bootaddr)
>>>> -        pdata->set_bootaddr(rproc->bootaddr);
>>>> +    if (oproc->boot_data)
>>>> +        omap_rproc_write_dsp_boot_addr(rproc);
>>>>         client->dev = dev;
>>>>       client->tx_done = NULL;
>>>> @@ -117,7 +156,7 @@ static int omap_rproc_start(struct rproc *rproc)
>>>>       client->tx_block = false;
>>>>       client->knows_txdone = false;
>>>>   -    oproc->mbox = omap_mbox_request_channel(client,
>>>> pdata->mbox_name);
>>>> +    oproc->mbox = mbox_request_channel(client, 0);
>>>>       if (IS_ERR(oproc->mbox)) {
>>>>           ret = -EBUSY;
>>>>           dev_err(dev, "mbox_request_channel failed: %ld\n",
>>>> @@ -138,11 +177,7 @@ static int omap_rproc_start(struct rproc *rproc)
>>>>           goto put_mbox;
>>>>       }
>>>>   -    ret = pdata->device_enable(pdev);
>>>> -    if (ret) {
>>>> -        dev_err(dev, "omap_device_enable failed: %d\n", ret);
>>>> -        goto put_mbox;
>>>> -    }
>>>> +    reset_control_deassert(oproc->reset);
>>>>         return 0;
>>>>   @@ -154,15 +189,9 @@ static int omap_rproc_start(struct rproc *rproc)
>>>>   /* power off the remote processor */
>>>>   static int omap_rproc_stop(struct rproc *rproc)
>>>>   {
>>>> -    struct device *dev = rproc->dev.parent;
>>>> -    struct platform_device *pdev = to_platform_device(dev);
>>>> -    struct omap_rproc_pdata *pdata = pdev->dev.platform_data;
>>>>       struct omap_rproc *oproc = rproc->priv;
>>>> -    int ret;
>>>>   -    ret = pdata->device_shutdown(pdev);
>>>> -    if (ret)
>>>> -        return ret;
>>>> +    reset_control_assert(oproc->reset);
>
> Any reasons for dropping the checks for the return status and wherever
> you replaced the pdata callbacks with the desired reset API?

Ok, let me try to add the checks back.

>
>>>>         mbox_free_channel(oproc->mbox);
>>>>   @@ -175,12 +204,122 @@ static const struct rproc_ops omap_rproc_ops
>>>> = {
>>>>       .kick        = omap_rproc_kick,
>>>>   };
>>>>   +static const struct omap_rproc_dev_data omap4_dsp_dev_data = {
>>>> +    .device_name    = "dsp",
>>>> +    .has_bootreg    = true,
>>>> +};
>>>> +
>>>> +static const struct omap_rproc_dev_data omap4_ipu_dev_data = {
>>>> +    .device_name    = "ipu",
>>>> +};
>>>> +
>>>> +static const struct omap_rproc_dev_data omap5_dsp_dev_data = {
>>>> +    .device_name    = "dsp",
>>>> +    .has_bootreg    = true,
>>>> +};
>>>> +
>>>> +static const struct omap_rproc_dev_data omap5_ipu_dev_data = {
>>>> +    .device_name    = "ipu",
>>>> +};
>>>> +
>>>> +static const struct of_device_id omap_rproc_of_match[] = {
>>>> +    {
>>>> +        .compatible     = "ti,omap4-dsp",
>>>> +        .data           = &omap4_dsp_dev_data,
>>>> +    },
>>>> +    {
>>>> +        .compatible     = "ti,omap4-ipu",
>>>> +        .data           = &omap4_ipu_dev_data,
>>>> +    },
>>>> +    {
>>>> +        .compatible     = "ti,omap5-dsp",
>>>> +        .data           = &omap5_dsp_dev_data,
>>>> +    },
>>>> +    {
>>>> +        .compatible     = "ti,omap5-ipu",
>>>> +        .data           = &omap5_ipu_dev_data,
>>>> +    },
>>>> +    {
>>>> +        /* end */
>>>> +    },
>>>> +};
>>>> +MODULE_DEVICE_TABLE(of, omap_rproc_of_match);
>>>> +
>>>> +static const char *omap_rproc_get_firmware(struct platform_device
>>>> *pdev)
>>>> +{
>>>> +    const char *fw_name;
>>>> +    int ret;
>>>> +
>>>> +    ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
>>>> +                      &fw_name);
>>>> +    if (ret)
>>>> +        return ERR_PTR(ret);
>>>> +
>>>> +    return fw_name;
>>>> +}
>>>> +
>>>> +static int omap_rproc_get_boot_data(struct platform_device *pdev,
>>>> +                    struct rproc *rproc)
>>>> +{
>>>> +    struct device_node *np = pdev->dev.of_node;
>>>> +    struct omap_rproc *oproc = rproc->priv;
>>>> +    const struct omap_rproc_dev_data *data;
>>>> +    int ret;
>>>> +
>>>> +    data = of_device_get_match_data(&pdev->dev);
>>>> +    if (!data)
>>>> +        return -ENODEV;
>>>> +
>>>> +    if (!data->has_bootreg)
>>>> +        return 0;
>>>> +
>>>> +    oproc->boot_data = devm_kzalloc(&pdev->dev,
>>>> sizeof(*oproc->boot_data),
>>>> +                    GFP_KERNEL);
>>>> +    if (!oproc->boot_data)
>>>> +        return -ENOMEM;
>>>> +
>>>> +    if (!of_property_read_bool(np, "ti,bootreg")) {
>>>> +        dev_err(&pdev->dev, "ti,bootreg property is missing\n");
>>>> +        return -EINVAL;
>>>> +    }
>>>> +
>>>> +    oproc->boot_data->syscon =
>>>> +            syscon_regmap_lookup_by_phandle(np, "ti,bootreg");
>>>> +    if (IS_ERR(oproc->boot_data->syscon)) {
>>>> +        ret = PTR_ERR(oproc->boot_data->syscon);
>>>> +        return ret;
>>>> +    }
>>>> +
>>>> +    if (of_property_read_u32_index(np, "ti,bootreg", 1,
>>>> +                       &oproc->boot_data->boot_reg)) {
>>>> +        dev_err(&pdev->dev, "couldn't get the boot register\n");
>>>> +        return -EINVAL;
>>>> +    }
>>>> +
>>>> +    return 0;
>>>> +}
>>>> +
>>>>   static int omap_rproc_probe(struct platform_device *pdev)
>>>>   {
>>>> -    struct omap_rproc_pdata *pdata = pdev->dev.platform_data;
>>>> +    struct device_node *np = pdev->dev.of_node;
>>>>       struct omap_rproc *oproc;
>>>>       struct rproc *rproc;
>>>> +    const char *firmware;
>>>>       int ret;
>>>> +    struct reset_control *reset;
>>>> +
>>>> +    if (!np) {
>>>> +        dev_err(&pdev->dev, "only DT-based devices are supported\n");
>>>> +        return -ENODEV;
>>>> +    }
>>>> +
>>>> +    reset =
>>>> devm_reset_control_array_get_optional_exclusive(&pdev->dev);
>>>> +    if (IS_ERR(reset))
>>>> +        return PTR_ERR(reset);
>>>
>>> Definition of a reset is listed as "required" in the bindings but here
>>> it is
>>> optional.  If this is really what you want then adding a comment to
>>> exlain your
>>> choice is probably a good idea.
>>
>> Right, I think I updated the binding to require this but forgot to
>> update the driver for this part. Will fix this.
>>
>> -Tero
>>
>>>
>>>> +
>>>> +    firmware = omap_rproc_get_firmware(pdev);
>>>> +    if (IS_ERR(firmware))
>>>> +        return PTR_ERR(firmware);
>>>>         ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
>>>>       if (ret) {
>>>> @@ -188,16 +327,21 @@ static int omap_rproc_probe(struct
>>>> platform_device *pdev)
>>>>           return ret;
>>>>       }
>>>>   -    rproc = rproc_alloc(&pdev->dev, pdata->name, &omap_rproc_ops,
>>>> -                pdata->firmware, sizeof(*oproc));
>>>> +    rproc = rproc_alloc(&pdev->dev, dev_name(&pdev->dev),
>>>> &omap_rproc_ops,
>>>> +                firmware, sizeof(*oproc));
>>>>       if (!rproc)
>>>>           return -ENOMEM;
>>>>         oproc = rproc->priv;
>>>>       oproc->rproc = rproc;
>>>> +    oproc->reset = reset;
>>>>       /* All existing OMAP IPU and DSP processors have an MMU */
>>>>       rproc->has_iommu = true;
>>>>   +    ret = omap_rproc_get_boot_data(pdev, rproc);
>>>> +    if (ret)
>>>> +        goto free_rproc;
>>>> +
>>>>       platform_set_drvdata(pdev, rproc);
>>>>         ret = rproc_add(rproc);
>>>> @@ -226,6 +370,7 @@ static struct platform_driver omap_rproc_driver = {
>>>>       .remove = omap_rproc_remove,
>>>>       .driver = {
>>>>           .name = "omap-rproc",
>>>> +        .of_match_table = omap_rproc_of_match,
>>>
>>>                  .of_match_table = of_match_ptr(omap_rproc_of_match),
>
> I had dropped this sometime back intentionally as all our platforms are
> DT-only.

Hmm, dropped what?

-Tero

>
> regards
> Suman
>
>>>
>>> Thanks,
>>> Mathieu
>>>
>>>>       },
>>>>   };
>>>>   --
>>>> 2.17.1
>>>>
>>>> --
>>
>> --
>

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-12-20 10:37    [W:0.080 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site