lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 5.4 00/80] 5.4.6-stable review
Date
This is the start of the stable review cycle for the 5.4.6 release.
There are 80 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 21 Dec 2019 18:24:44 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.6-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 5.4.6-rc1

changzhu <Changfeng.Zhu@amd.com>
drm/amdgpu: add invalidate semaphore limit for SRIOV and picasso in gmc9

changzhu <Changfeng.Zhu@amd.com>
drm/amdgpu: avoid using invalidate semaphore for picasso

Zhenyu Wang <zhenyuw@linux.intel.com>
drm/i915/gvt: Fix cmd length check for MI_ATOMIC

Xiaojie Yuan <xiaojie.yuan@amd.com>
drm/amdgpu/gfx10: re-init clear state buffer after gpu reset

Xiaojie Yuan <xiaojie.yuan@amd.com>
drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt

changzhu <Changfeng.Zhu@amd.com>
drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10

changzhu <Changfeng.Zhu@amd.com>
drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub

Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: add default clocks if not able to fetch them

Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: re-enable wait in pipelock, but add timeout

Wayne Lin <Wayne.Lin@amd.com>
drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()

Alex Deucher <alexander.deucher@amd.com>
drm/radeon: fix r1xx/r2xx register checker for POT textures

Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915/fbc: Disable fbc by default on all glk+

Lyude Paul <lyude@redhat.com>
drm/nouveau/kms/nv50-: Limit MST BPC to 8

Lyude Paul <lyude@redhat.com>
drm/nouveau/kms/nv50-: Store the bpc we're using in nv50_head_atom

Lyude Paul <lyude@redhat.com>
drm/nouveau/kms/nv50-: Call outp_atomic_check_view() before handling PBN

Michael Hernandez <mhernandez@marvell.com>
scsi: qla2xxx: Fix incorrect SFUB length used for Secure Flash Update MB Cmd

Himanshu Madhani <hmadhani@marvell.com>
scsi: qla2xxx: Correctly retrieve and interpret active flash region

Roman Bolshakov <r.bolshakov@yadro.com>
scsi: qla2xxx: Change discovery state before PLOGI

Michael Hernandez <mhernandez@marvell.com>
scsi: qla2xxx: Added support for MPI and PEP regions for ISP28XX

Roman Bolshakov <r.bolshakov@yadro.com>
scsi: qla2xxx: Initialize free_work before flushing it

Roman Bolshakov <r.bolshakov@yadro.com>
scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd

Bart Van Assche <bvanassche@acm.org>
scsi: iscsi: Fix a potential deadlock in the timeout handler

sheebab <sheebab@cadence.com>
scsi: ufs: Disable autohibern8 feature in Cadence UFS

Nikos Tsironis <ntsironis@arrikto.com>
dm thin: Flush data device before committing metadata

Nikos Tsironis <ntsironis@arrikto.com>
dm thin metadata: Add support for a pre-commit callback

Nikos Tsironis <ntsironis@arrikto.com>
dm clone: Flush destination device before committing metadata

Nikos Tsironis <ntsironis@arrikto.com>
dm clone metadata: Use a two phase commit

Nikos Tsironis <ntsironis@arrikto.com>
dm clone metadata: Track exact changes per transaction

Hou Tao <houtao1@huawei.com>
dm btree: increase rebalance threshold in __rebalance2()

Mike Snitzer <snitzer@redhat.com>
dm mpath: remove harmful bio-based optimization

Martin Blumenstingl <martin.blumenstingl@googlemail.com>
drm: meson: venc: cvbs: fix CVBS mode matching

Thomas Zimmermann <tzimmermann@suse.de>
drm/mgag200: Flag all G200 SE A machines as broken wrt <startadd>

Thomas Zimmermann <tzimmermann@suse.de>
drm/mgag200: Add workaround for HW that does not support 'startadd'

Thomas Zimmermann <tzimmermann@suse.de>
drm/mgag200: Store flags from PCI driver data in device structure

Thomas Zimmermann <tzimmermann@suse.de>
drm/mgag200: Extract device type from flags

Boris Brezillon <boris.brezillon@collabora.com>
drm/panfrost: Fix a race in panfrost_gem_free_object()

Boris Brezillon <boris.brezillon@collabora.com>
drm/panfrost: Fix a BO leak in panfrost_ioctl_mmap_bo()

Boris Brezillon <boris.brezillon@collabora.com>
drm/panfrost: Fix a race in panfrost_ioctl_madvise()

Navid Emamdoost <navid.emamdoost@gmail.com>
dma-buf: Fix memory leak in sync_file_merge()

Jiang Yi <giangyi@amazon.com>
vfio/pci: call irq_bypass_unregister_producer() before freeing irq

Dmitry Osipenko <digetx@gmail.com>
ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume()

Lihua Yao <ylhuajnu@outlook.com>
ARM: dts: s3c64xx: Fix init order of clock providers

Paulo Alcantara (SUSE) <pc@cjr.nz>
cifs: Fix retrieval of DFS referrals in cifs_mount()

Pavel Shilovsky <pshilov@microsoft.com>
CIFS: Fix NULL pointer dereference in mid callback

Pavel Shilovsky <pshilov@microsoft.com>
CIFS: Do not miss cancelled OPEN responses

Pavel Shilovsky <pshilov@microsoft.com>
CIFS: Close open handle after interrupted close

Pavel Shilovsky <pshilov@microsoft.com>
CIFS: Respect O_SYNC and O_DIRECT flags during reconnect

Long Li <longli@microsoft.com>
cifs: Don't display RDMA transport on reconnect

Long Li <longli@microsoft.com>
cifs: smbd: Return -ECONNABORTED when trasnport is not in connected state

Long Li <longli@microsoft.com>
cifs: smbd: Return -EINVAL when the number of iovs exceeds SMBDIRECT_MAX_SGE

Long Li <longli@microsoft.com>
cifs: smbd: Add messages on RDMA session destroy and reconnection

Long Li <longli@microsoft.com>
cifs: smbd: Only queue work for error recovery on memory registration

Long Li <longli@microsoft.com>
cifs: smbd: Return -EAGAIN when transport is reconnecting

Bjorn Andersson <bjorn.andersson@linaro.org>
rpmsg: glink: Free pending deferred work on remove

Bjorn Andersson <bjorn.andersson@linaro.org>
rpmsg: glink: Don't send pending rx_done during remove

Chris Lew <clew@codeaurora.org>
rpmsg: glink: Fix rpmsg_register_device err handling

Chris Lew <clew@codeaurora.org>
rpmsg: glink: Put an extra reference during cleanup

Arun Kumar Neelakantam <aneela@codeaurora.org>
rpmsg: glink: Fix use after free in open_ack TIMEOUT case

Arun Kumar Neelakantam <aneela@codeaurora.org>
rpmsg: glink: Fix reuse intents memory leak issue

Chris Lew <clew@codeaurora.org>
rpmsg: glink: Set tail pointer to 0 at end of FIFO

Max Filippov <jcmvbkbc@gmail.com>
xtensa: fix syscall_set_return_value

Max Filippov <jcmvbkbc@gmail.com>
xtensa: fix TLB sanity checker

Bob Peterson <rpeterso@redhat.com>
gfs2: fix glock reference problem in gfs2_trans_remove_revoke

Andreas Gruenbacher <agruenba@redhat.com>
gfs2: Multi-block allocations in gfs2_page_mkwrite

Max Filippov <jcmvbkbc@gmail.com>
xtensa: use MEMBLOCK_ALLOC_ANYWHERE for KASAN shadow map

Andreas Gruenbacher <agruenba@redhat.com>
block: fix "check bi_size overflow before merge"

Leonard Crestez <leonard.crestez@nxp.com>
PM / QoS: Redefine FREQ_QOS_MAX_DEFAULT_VALUE to S32_MAX

George Cherian <george.cherian@marvell.com>
PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
PCI: rcar: Fix missing MACCTLR register setting in initialization sequence

Subbaraya Sundeep <sbhatta@marvell.com>
PCI: Do not use bus number zero from EA capability

Jian-Hong Pan <jian-hong@endlessm.com>
PCI/MSI: Fix incorrect MSI-X masking on resume

Steffen Liebergeld <steffen.liebergeld@kernkonzept.com>
PCI: Fix Intel ACS quirk UPDCR register address

Lukas Wunner <lukas@wunner.de>
PCI: pciehp: Avoid returning prematurely from sysfs requests

Dexuan Cui <decui@microsoft.com>
PCI/PM: Always return devices to D0 when thawing

Logan Gunthorpe <logang@deltatee.com>
PCI/switchtec: Read all 64 bits of part_event_bitmap

Ulf Hansson <ulf.hansson@linaro.org>
mmc: core: Re-work HW reset for SDIO cards

Ulf Hansson <ulf.hansson@linaro.org>
mmc: core: Drop check for mmc_card_is_removable() in mmc_rescan()

Chaotian Jing <chaotian.jing@mediatek.com>
mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response

Chaotian Jing <chaotian.jing@mediatek.com>
mmc: block: Make card_busy_detect() a bit more generic

Fredrik Noring <noring@nocrew.org>
USB: Fix incorrect DMA allocations for local memory pool drivers


-------------

Diffstat:

Makefile | 4 +-
arch/arm/boot/dts/s3c6410-mini6410.dts | 4 +
arch/arm/boot/dts/s3c6410-smdk6410.dts | 4 +
arch/arm/mach-tegra/reset-handler.S | 6 +-
arch/xtensa/include/asm/syscall.h | 2 +-
arch/xtensa/mm/kasan_init.c | 4 +-
arch/xtensa/mm/tlb.c | 4 +-
block/bio.c | 4 +-
drivers/dma-buf/sync_file.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_gmc.h | 1 +
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 57 ++++++--
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c | 2 +
drivers/gpu/drm/amd/amdgpu/gfxhub_v2_0.c | 2 +
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 57 ++++++++
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 73 ++++++++++
drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c | 2 +
drivers/gpu/drm/amd/amdgpu/mmhub_v2_0.c | 2 +
drivers/gpu/drm/amd/amdgpu/mmhub_v9_4.c | 4 +
drivers/gpu/drm/amd/amdgpu/soc15.h | 4 +-
.../drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c | 3 +-
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 19 +++
drivers/gpu/drm/drm_dp_mst_topology.c | 6 +-
drivers/gpu/drm/i915/display/intel_fbc.c | 2 +-
drivers/gpu/drm/i915/gvt/cmd_parser.c | 6 +-
drivers/gpu/drm/meson/meson_venc_cvbs.c | 48 ++++---
drivers/gpu/drm/mgag200/mgag200_drv.c | 36 ++++-
drivers/gpu/drm/mgag200/mgag200_drv.h | 18 +++
drivers/gpu/drm/mgag200/mgag200_main.c | 3 +-
drivers/gpu/drm/nouveau/dispnv50/atom.h | 1 +
drivers/gpu/drm/nouveau/dispnv50/disp.c | 102 ++++++++------
drivers/gpu/drm/nouveau/dispnv50/head.c | 5 +-
drivers/gpu/drm/panfrost/panfrost_drv.c | 18 +--
drivers/gpu/drm/panfrost/panfrost_gem.c | 15 +-
drivers/gpu/drm/radeon/r100.c | 4 +-
drivers/gpu/drm/radeon/r200.c | 4 +-
drivers/md/dm-clone-metadata.c | 136 ++++++++++++++-----
drivers/md/dm-clone-metadata.h | 17 +++
drivers/md/dm-clone-target.c | 53 +++++++-
drivers/md/dm-mpath.c | 37 +----
drivers/md/dm-thin-metadata.c | 29 ++++
drivers/md/dm-thin-metadata.h | 7 +
drivers/md/dm-thin.c | 42 +++++-
drivers/md/persistent-data/dm-btree-remove.c | 8 +-
drivers/mmc/core/block.c | 151 ++++++++-------------
drivers/mmc/core/core.c | 12 +-
drivers/mmc/core/core.h | 2 +
drivers/mmc/core/sdio.c | 28 +++-
drivers/mmc/core/sdio_bus.c | 9 +-
drivers/pci/controller/pcie-rcar.c | 6 +
drivers/pci/hotplug/pciehp.h | 2 +
drivers/pci/hotplug/pciehp_ctrl.c | 6 +-
drivers/pci/hotplug/pciehp_hpc.c | 2 +
drivers/pci/msi.c | 3 +-
drivers/pci/pci-driver.c | 17 ++-
drivers/pci/probe.c | 16 ++-
drivers/pci/quirks.c | 22 +--
drivers/pci/switch/switchtec.c | 2 +-
drivers/rpmsg/qcom_glink_native.c | 53 ++++++--
drivers/rpmsg/qcom_glink_smem.c | 2 +-
drivers/scsi/libiscsi.c | 4 +-
drivers/scsi/qla2xxx/qla_attr.c | 1 +
drivers/scsi/qla2xxx/qla_bsg.c | 2 +-
drivers/scsi/qla2xxx/qla_fw.h | 4 +
drivers/scsi/qla2xxx/qla_init.c | 2 +
drivers/scsi/qla2xxx/qla_sup.c | 35 +++--
drivers/scsi/qla2xxx/qla_target.c | 1 -
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 +
drivers/scsi/ufs/cdns-pltfrm.c | 6 +
drivers/usb/core/hcd.c | 42 +++---
drivers/usb/storage/scsiglue.c | 3 +-
drivers/vfio/pci/vfio_pci_intrs.c | 2 +-
fs/cifs/cifs_debug.c | 5 +
fs/cifs/cifsglob.h | 1 +
fs/cifs/connect.c | 53 +++++---
fs/cifs/file.c | 7 +
fs/cifs/smb2misc.c | 59 ++++++--
fs/cifs/smb2ops.c | 8 +-
fs/cifs/smb2pdu.c | 16 ++-
fs/cifs/smb2proto.h | 3 +
fs/cifs/smbdirect.c | 36 +++--
fs/cifs/transport.c | 17 ++-
fs/gfs2/file.c | 15 +-
fs/gfs2/log.c | 8 ++
fs/gfs2/log.h | 1 +
fs/gfs2/lops.c | 5 +-
fs/gfs2/trans.c | 2 +
include/linux/mmc/card.h | 1 +
include/linux/pm_qos.h | 2 +-
88 files changed, 1093 insertions(+), 440 deletions(-)


\
 
 \ /
  Last update: 2019-12-19 19:55    [W:0.242 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site