lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 020/199] ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+
Date
From: Vincent Whitchurch <vincent.whitchurch@axis.com>

[ Upstream commit 344eb5539abf3e0b6ce22568c03e86450073e097 ]

getuser() and putuser() (and there underscored variants) use two
strb[t]/ldrb[t] instructions when they are asked to get/put 16-bits.
This means that the read/write is not atomic even when performed to a
16-bit-aligned address.

This leads to problems with vhost: vhost uses __getuser() to read the
vring's 16-bit avail.index field, and if it happens to observe a partial
update of the index, wrong descriptors will be used which will lead to a
breakdown of the virtio communication. A similar problem exists for
__putuser() which is used to write to the vring's used.index field.

The reason these functions use strb[t]/ldrb[t] is because strht/ldrht
instructions did not exist until ARMv6T2/ARMv7. So we should be easily
able to fix this on ARMv7. Also, since all ARMv6 processors also don't
actually use the unprivileged instructions anymore for uaccess (since
CONFIG_CPU_USE_DOMAINS is not used) we can easily fix them too.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/include/asm/uaccess.h | 18 ++++++++++++++++++
arch/arm/lib/getuser.S | 11 +++++++++++
arch/arm/lib/putuser.S | 20 ++++++++++----------
3 files changed, 39 insertions(+), 10 deletions(-)

diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 0f6c6b873bc5f..e05c31af48d1b 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -379,6 +379,13 @@ do { \
#define __get_user_asm_byte(x, addr, err) \
__get_user_asm(x, addr, err, ldrb)

+#if __LINUX_ARM_ARCH__ >= 6
+
+#define __get_user_asm_half(x, addr, err) \
+ __get_user_asm(x, addr, err, ldrh)
+
+#else
+
#ifndef __ARMEB__
#define __get_user_asm_half(x, __gu_addr, err) \
({ \
@@ -397,6 +404,8 @@ do { \
})
#endif

+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
#define __get_user_asm_word(x, addr, err) \
__get_user_asm(x, addr, err, ldr)
#endif
@@ -472,6 +481,13 @@ do { \
#define __put_user_asm_byte(x, __pu_addr, err) \
__put_user_asm(x, __pu_addr, err, strb)

+#if __LINUX_ARM_ARCH__ >= 6
+
+#define __put_user_asm_half(x, __pu_addr, err) \
+ __put_user_asm(x, __pu_addr, err, strh)
+
+#else
+
#ifndef __ARMEB__
#define __put_user_asm_half(x, __pu_addr, err) \
({ \
@@ -488,6 +504,8 @@ do { \
})
#endif

+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
#define __put_user_asm_word(x, __pu_addr, err) \
__put_user_asm(x, __pu_addr, err, str)

diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 746e7801dcdf7..b2e4bc3a635e2 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -42,6 +42,12 @@ _ASM_NOKPROBE(__get_user_1)

ENTRY(__get_user_2)
check_uaccess r0, 2, r1, r2, __get_user_bad
+#if __LINUX_ARM_ARCH__ >= 6
+
+2: TUSER(ldrh) r2, [r0]
+
+#else
+
#ifdef CONFIG_CPU_USE_DOMAINS
rb .req ip
2: ldrbt r2, [r0], #1
@@ -56,6 +62,9 @@ rb .req r0
#else
orr r2, rb, r2, lsl #8
#endif
+
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
mov r0, #0
ret lr
ENDPROC(__get_user_2)
@@ -145,7 +154,9 @@ _ASM_NOKPROBE(__get_user_bad8)
.pushsection __ex_table, "a"
.long 1b, __get_user_bad
.long 2b, __get_user_bad
+#if __LINUX_ARM_ARCH__ < 6
.long 3b, __get_user_bad
+#endif
.long 4b, __get_user_bad
.long 5b, __get_user_bad8
.long 6b, __get_user_bad8
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 38d660d3705f4..515eeaa9975c6 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -41,16 +41,13 @@ ENDPROC(__put_user_1)

ENTRY(__put_user_2)
check_uaccess r0, 2, r1, ip, __put_user_bad
- mov ip, r2, lsr #8
-#ifdef CONFIG_THUMB2_KERNEL
-#ifndef __ARMEB__
-2: TUSER(strb) r2, [r0]
-3: TUSER(strb) ip, [r0, #1]
+#if __LINUX_ARM_ARCH__ >= 6
+
+2: TUSER(strh) r2, [r0]
+
#else
-2: TUSER(strb) ip, [r0]
-3: TUSER(strb) r2, [r0, #1]
-#endif
-#else /* !CONFIG_THUMB2_KERNEL */
+
+ mov ip, r2, lsr #8
#ifndef __ARMEB__
2: TUSER(strb) r2, [r0], #1
3: TUSER(strb) ip, [r0]
@@ -58,7 +55,8 @@ ENTRY(__put_user_2)
2: TUSER(strb) ip, [r0], #1
3: TUSER(strb) r2, [r0]
#endif
-#endif /* CONFIG_THUMB2_KERNEL */
+
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
mov r0, #0
ret lr
ENDPROC(__put_user_2)
@@ -91,7 +89,9 @@ ENDPROC(__put_user_bad)
.pushsection __ex_table, "a"
.long 1b, __put_user_bad
.long 2b, __put_user_bad
+#if __LINUX_ARM_ARCH__ < 6
.long 3b, __put_user_bad
+#endif
.long 4b, __put_user_bad
.long 5b, __put_user_bad
.long 6b, __put_user_bad
--
2.20.1


\
 
 \ /
  Last update: 2019-12-19 19:42    [W:0.508 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site