lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] phy: qcom-qmp: Increase the phy init timeout
Date
If we do full reset of the phy, it seems to take a couple of ms to come
up on my system so increase the timeout to 10ms.

This was found by full reset addition by commit 870b1279c7a0
("scsi: ufs-qcom: Add reset control support for host controller") and
fixes the regression to platforms by this commit.

Suggested-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 091e20303a14..c2e800a3825a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -66,7 +66,7 @@
/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
#define CLAMP_EN BIT(0) /* enables i/o clamp_n */

-#define PHY_INIT_COMPLETE_TIMEOUT 1000
+#define PHY_INIT_COMPLETE_TIMEOUT 100000
#define POWER_DOWN_DELAY_US_MIN 10
#define POWER_DOWN_DELAY_US_MAX 11

--
2.23.0
\
 
 \ /
  Last update: 2019-12-19 16:05    [W:0.149 / U:2.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site