lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2] tty: serial: 21285: stop using the unused[] variable from struct uart_port
Much like the samsung_tty driver (now I know where they copied the idea
from), the 21285 uart driver uses 2 bytes from the "unused" array of
struct uart_port to keep tx/rx enabled/disabled state. Those fields are
going away (they were never really needed in the first place), so fix up
the 21285 driver by another horrible hack.

Instead of creating a whole structure for just 2 bytes, just use two
bits from the private_data pointer instead, as that pointer is never
used. The two bits reflect if tx/rx is now enabled/disabled.

Astute readers will note that once rx is disabled, nothing ever seems to
turn it back on, making one wonder if anyone has ever done this.

Reported-by: kbuild test robot <lkp@intel.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/21285.c | 55 +++++++++++++++++++++++++++++++-------
1 file changed, 45 insertions(+), 10 deletions(-)

v2: use clear_bit(), not set_bit() to actually clear a bit :)

diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
index 32b3acf8150a..718e010fcb04 100644
--- a/drivers/tty/serial/21285.c
+++ b/drivers/tty/serial/21285.c
@@ -41,8 +41,43 @@

static const char serial21285_name[] = "Footbridge UART";

-#define tx_enabled(port) ((port)->unused[0])
-#define rx_enabled(port) ((port)->unused[1])
+/*
+ * We only need 2 bits of data, so instead of creating a whole structure for
+ * this, use bits of the private_data pointer of the uart port structure.
+ */
+#define tx_enabled_bit 0
+#define rx_enabled_bit 1
+
+static bool is_enabled(struct uart_port *port, int bit)
+{
+ unsigned long private_data = (unsigned long)port->private_data;
+
+ if (test_bit(bit, &private_data))
+ return true;
+ return false;
+}
+
+static void enable(struct uart_port *port, int bit)
+{
+ unsigned long private_data = (unsigned long)port->private_data;
+
+ set_bit(bit, &private_data);
+}
+
+static void disable(struct uart_port *port, int bit)
+{
+ unsigned long private_data = (unsigned long)port->private_data;
+
+ clear_bit(bit, &private_data);
+}
+
+#define is_tx_enabled(port) is_enabled(port, tx_enabled_bit)
+#define tx_enable(port) enable(port, tx_enabled_bit)
+#define tx_disable(port) disable(port, tx_enabled_bit)
+
+#define is_rx_enabled(port) is_enabled(port, rx_enabled_bit)
+#define rx_enable(port) enable(port, rx_enabled_bit)
+#define rx_disable(port) disable(port, rx_enabled_bit)

/*
* The documented expression for selecting the divisor is:
@@ -57,25 +92,25 @@ static const char serial21285_name[] = "Footbridge UART";

static void serial21285_stop_tx(struct uart_port *port)
{
- if (tx_enabled(port)) {
+ if (is_tx_enabled(port)) {
disable_irq_nosync(IRQ_CONTX);
- tx_enabled(port) = 0;
+ tx_disable(port);
}
}

static void serial21285_start_tx(struct uart_port *port)
{
- if (!tx_enabled(port)) {
+ if (!is_tx_enabled(port)) {
enable_irq(IRQ_CONTX);
- tx_enabled(port) = 1;
+ tx_enable(port);
}
}

static void serial21285_stop_rx(struct uart_port *port)
{
- if (rx_enabled(port)) {
+ if (is_rx_enabled(port)) {
disable_irq_nosync(IRQ_CONRX);
- rx_enabled(port) = 0;
+ rx_disable(port);
}
}

@@ -185,8 +220,8 @@ static int serial21285_startup(struct uart_port *port)
{
int ret;

- tx_enabled(port) = 1;
- rx_enabled(port) = 1;
+ tx_enable(port);
+ rx_enable(port);

ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0,
serial21285_name, port);
--
2.24.1
\
 
 \ /
  Last update: 2019-12-19 15:52    [W:0.052 / U:0.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site