lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks
From
Date
Quoting Bjorn Andersson (2019-12-07 12:36:02)
> The CLKREF clocks are all fed by the clock signal on the CXO2 pad on the
> SoC. Update the definition of these clocks to allow this to be wired up
> to the appropriate clock source.
>
> Retain "xo" as the global named parent to make the change a nop in the
> event that DT doesn't carry the necessary clocks definition.

Something seems wrong still.

I wonder if we need to add the XO "active only" clk to the rpm clk
driver(s) and mark it as CLK_IS_CRITICAL. In theory that is really the
truth for most of the SoCs out there because it's the only crystal that
needs to be on all the time when the CPU is active. The "normal" XO clk
will then be on all the time unless deep idle is entered and nobody has
turned that on via some clk_prepare() call. That's because we root all
other clks through the "normal" XO clk that will be on in deep
idle/suspend if someone needs it to be.

Did the downstream code explicitly enable this ln_bb_clk in the phy
drivers? I think it may have?

\
 
 \ /
  Last update: 2019-12-19 07:38    [W:0.107 / U:7.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site