lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] nvmem: add QTI SDAM driver
On 2019-12-18 11:44, Bjorn Andersson wrote:
> On Tue 17 Dec 01:20 PST 2019, Shyam Kumar Thella wrote:
>
>> QTI SDAM driver allows PMIC peripherals to access the shared memory
>> that is available on QTI PMICs.
>>
>> Change-Id: I40005646ab1fbba9e0e4aa68e0a61cfbc7b51ba6
>
> No Change-Id upstream please.
OK. I will remove it in next patch set.
>
>> Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
> [..]
>> diff --git a/drivers/nvmem/qcom-spmi-sdam.c
>> b/drivers/nvmem/qcom-spmi-sdam.c
>> new file mode 100644
>> index 0000000..e80a446
>> --- /dev/null
>> +++ b/drivers/nvmem/qcom-spmi-sdam.c
>> @@ -0,0 +1,197 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2017 The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#include <linux/device.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/nvmem-provider.h>
>> +#include <linux/regmap.h>
>> +
>> +#define SDAM_MEM_START 0x40
>> +#define REGISTER_MAP_ID 0x40
>> +#define REGISTER_MAP_VERSION 0x41
>> +#define SDAM_SIZE 0x44
>> +#define SDAM_PBS_TRIG_SET 0xE5
>> +#define SDAM_PBS_TRIG_CLR 0xE6
>> +
>> +struct sdam_chip {
>> + struct platform_device *pdev;
>
> As written right now, pdev is unused. But if you stash struct device *
> here instead you can replace your pr_err() with dev_err() using this,
> for better error messages.
>
I will use dev_err messages in next patchset.
>> + struct regmap *regmap;
>> + int base;
>
> This would look better as a unsigned int.
OK. I will do it in next patch set.
>
>> + int size;
>
> Ditto, or perhaps even size_t.
OK. I will do it.
>
>> +};
>> +
>> +/* read only register offsets */
>> +static const u8 sdam_ro_map[] = {
>> + REGISTER_MAP_ID,
>> + REGISTER_MAP_VERSION,
>> + SDAM_SIZE
>> +};
>> +
>> +static bool is_valid(struct sdam_chip *sdam, unsigned int offset,
>> size_t len)
>
> Please do prefix this with "sdam_"
OK. I will prefix is_valid and is_ro with "sdam_".
>
>> +{
>> + int sdam_mem_end = SDAM_MEM_START + sdam->size - 1;
>> +
>> + if (!len)
>> + return false;
>> +
>> + if (offset >= SDAM_MEM_START && offset <= sdam_mem_end
>> + && (offset + len - 1) <= sdam_mem_end)
>> + return true;
>> + else if ((offset == SDAM_PBS_TRIG_SET || offset ==
>> SDAM_PBS_TRIG_CLR)
>> + && (len == 1))
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +static bool is_ro(unsigned int offset, size_t len)
>
> Ditto
OK.
>
>> +{
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(sdam_ro_map); i++)
>> + if (offset <= sdam_ro_map[i] && (offset + len) > sdam_ro_map[i])
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +static int sdam_read(void *priv, unsigned int offset, void *val,
>> size_t bytes)
>> +{
>> + struct sdam_chip *sdam = priv;
>> + int rc;
>> +
>> + if (!is_valid(sdam, offset, bytes)) {
>> + pr_err("Invalid SDAM offset 0x%02x len=%zd\n", offset, bytes);
>
> Use %#x instead of 0x%02x
OK. Will do it in next patch set.
>
>> + return -EINVAL;
>> + }
>> +
>> + rc = regmap_bulk_read(sdam->regmap, sdam->base + offset, val,
>> bytes);
>> + if (rc < 0)
>> + pr_err("Failed to read SDAM offset 0x%02x len=%zd, rc=%d\n",
>> + offset, bytes, rc);
>> +
>> + return rc;
>> +}
>> +
>> +static int sdam_write(void *priv, unsigned int offset, void *val,
>> size_t bytes)
>> +{
>> + struct sdam_chip *sdam = priv;
>> + int rc;
>> +
>> + if (!is_valid(sdam, offset, bytes)) {
>> + pr_err("Invalid SDAM offset 0x%02x len=%zd\n", offset, bytes);
>> + return -EINVAL;
>> + }
>> +
>> + if (is_ro(offset, bytes)) {
>> + pr_err("Invalid write offset 0x%02x len=%zd\n", offset, bytes);
>> + return -EINVAL;
>> + }
>> +
>> + rc = regmap_bulk_write(sdam->regmap, sdam->base + offset, val,
>> bytes);
>> + if (rc < 0)
>> + pr_err("Failed to write SDAM offset 0x%02x len=%zd, rc=%d\n",
>> + offset, bytes, rc);
>> +
>> + return rc;
>> +}
>> +
>> +static int sdam_probe(struct platform_device *pdev)
>> +{
>> + struct sdam_chip *sdam;
>> + struct nvmem_device *nvmem;
>> + struct nvmem_config *sdam_config;
>> + unsigned int val = 0;
>
> No need to initialize this.
OK. I will remove initialization in next patch set.
>
>> + int rc;
>> +
>> + sdam = devm_kzalloc(&pdev->dev, sizeof(*sdam), GFP_KERNEL);
>> + if (!sdam)
>> + return -ENOMEM;
>> +
>> + sdam_config = devm_kzalloc(&pdev->dev, sizeof(*sdam_config),
>> + GFP_KERNEL);
>
> Can't this be included in struct sdam_chip, for a single allocation?
OK. I will make this a member in struct sdam_chip and eliminate need for
dynamic allocation.
>
>> + if (!sdam_config)
>> + return -ENOMEM;
>> +
>> + sdam->regmap = dev_get_regmap(pdev->dev.parent, NULL);
>> + if (!sdam->regmap) {
>> + pr_err("Failed to get regmap handle\n");
>
> dev_err(&pdev->dev, ...);
OK. I will change all pr_err()... to dev_err().
>
>> + return -ENXIO;
>> + }
>> +
>> + rc = of_property_read_u32(pdev->dev.of_node, "reg", &sdam->base);
>
> In other words, base must be u32.
OK. This will be changed to u32 in next patchs et.
>
>> + if (rc < 0) {
>> + pr_err("Failed to get SDAM base, rc=%d\n", rc);
>> + return -EINVAL;
>> + }
>> +
>> + rc = regmap_read(sdam->regmap, sdam->base + SDAM_SIZE, &val);
>> + if (rc < 0) {
>> + pr_err("Failed to read SDAM_SIZE rc=%d\n", rc);
>> + return -EINVAL;
>> + }
>> + sdam->size = val * 32;
>> +
>> + sdam_config->dev = &pdev->dev;
>> + sdam_config->name = "spmi_sdam";
>> + sdam_config->id = pdev->id;
>> + sdam_config->owner = THIS_MODULE,
>> + sdam_config->stride = 1;
>> + sdam_config->word_size = 1;
>> + sdam_config->reg_read = sdam_read;
>> + sdam_config->reg_write = sdam_write;
>> + sdam_config->priv = sdam;
>> +
>> + nvmem = nvmem_register(sdam_config);
>> + if (IS_ERR(nvmem)) {
>> + pr_err("Failed to register SDAM nvmem device rc=%ld\n",
>> + PTR_ERR(nvmem));
>> + return -ENXIO;
>> + }
>> + platform_set_drvdata(pdev, nvmem);
>> +
>> + pr_info("SDAM base=0x%04x size=%d registered successfully\n",
>> + sdam->base, sdam->size);
>
> Please don't print notifications in the kernel log. You can possibly
> use
> dev_dbg(). Or just look for devices in
> /sys/bus/platform/drivers/qcom,spmi-sdam/
OK. I would usedev_dbg() to serve the purpose.
>
>> +
>> + return 0;
>> +}
>> +
>> +static int sdam_remove(struct platform_device *pdev)
>
> Instead of using nvmem_register(), use devm_nvmem_register() and just
> omit the remote function completely - which also allows you to drop the
> platform_set_drvdata() above.
Yes. You are right. That will help omit remove and
platform_set_drvdata().
>
>> +{
>> + struct nvmem_device *nvmem = platform_get_drvdata(pdev);
>> +
>> + return nvmem_unregister(nvmem);
>> +}
>> +
>> +static const struct of_device_id sdam_match_table[] = {
>> + {.compatible = "qcom,spmi-sdam"},
>
> Please add a space after { and before }.
OK. I will add spaces.
>
>> + {},
>> +};
>> +
>> +static struct platform_driver sdam_driver = {
>> + .driver = {
>> + .name = "qcom,spmi-sdam",
>> + .of_match_table = sdam_match_table,
>> + },
>> + .probe = sdam_probe,
>> + .remove = sdam_remove,
>> +};
>> +
>> +static int __init sdam_init(void)
>> +{
>> + return platform_driver_register(&sdam_driver);
>> +}
>> +subsys_initcall(sdam_init);
>
> module_platform_driver(sdam_driver), unless you have some strong
> arguments for why this needs to be subsys_initcall
There are some critical sybsystems which depend on nvmem data. So I
would prefer using subsys_initcall().
>
> Regards,
> Bjorn
>
>> +
>> +static void __exit sdam_exit(void)
>> +{
>> + return platform_driver_unregister(&sdam_driver);
>> +}
>> +module_exit(sdam_exit);
>> +
>> +MODULE_DESCRIPTION("QCOM SPMI SDAM driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
>> Forum,
>> a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2019-12-19 11:30    [W:0.075 / U:4.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site