lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v7 04/12] mfd: bd718x7: Add compatible for BD71850
ROHM BD71850 PMIC is almost identical to BD71847. Main difference is some
initial voltage values for regulators. The BD71850 can be handled by
BD71847 driver but adding own compatible makes it clearer for one who
creates the DT for board containing this PMIC and allows SW to be
differentiating PMICs if needed.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---

This is a new patch and added to this series only to avoid conflicts
with other bd718x7 changes introduced in this series. Please drop this
patch if it is not Ok to apply it in this series. DT binding doc for
this new compatible was sent in:
https://lore.kernel.org/lkml/20191217084824.GA26539@localhost.localdomain/

drivers/mfd/rohm-bd718x7.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c
index bb86ec829079..c32c1b6c98fa 100644
--- a/drivers/mfd/rohm-bd718x7.c
+++ b/drivers/mfd/rohm-bd718x7.c
@@ -213,6 +213,10 @@ static const struct of_device_id bd718xx_of_match[] = {
.compatible = "rohm,bd71847",
.data = (void *)ROHM_CHIP_TYPE_BD71847,
},
+ {
+ .compatible = "rohm,bd71850",
+ .data = (void *)ROHM_CHIP_TYPE_BD71847,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, bd718xx_of_match);
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

\
 
 \ /
  Last update: 2019-12-19 10:50    [W:0.139 / U:4.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site