lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v7 02/12] dt-bindings: mfd: Document ROHM BD71828 bindings
ROHM BD71828 Power management IC integrates 7 buck converters, 7 LDOs,
a real-time clock (RTC), 3 GPO/regulator control pins, HALL input
and a 32.768 kHz clock gate.

Document the dt bindings drivers are using.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---

No changes since v6

.../bindings/mfd/rohm,bd71828-pmic.yaml | 193 ++++++++++++++++++
1 file changed, 193 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml

diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
new file mode 100644
index 000000000000..4fbb9e734284
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit bindings
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+ BD71828GW is a single-chip power management IC for battery-powered portable
+ devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA
+ single-cell linear charger. Also included is a Coulomb counter, a real-time
+ clock (RTC), and a 32.768 kHz clock gate.
+
+properties:
+ compatible:
+ const: rohm,bd71828
+
+ reg:
+ description:
+ I2C slave address.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ The first cell is the pin number and the second cell is used to specify
+ flags. See ../gpio/gpio.txt for more information.
+
+ clocks:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 0
+
+ rohm,charger-sense-resistor-ohms:
+ minimum: 10000000
+ maximum: 50000000
+ description: |
+ BD71827 and BD71828 have SAR ADC for measuring charging currents.
+ External sense resistor (RSENSE in data sheet) should be used. If some
+ other but 30MOhm resistor is used the resistance value should be given
+ here in Ohms.
+
+ regulators:
+ $ref: ../regulator/rohm,bd71828-regulator.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+ leds:
+ $ref: ../leds/rohm,bd71828-leds.yaml
+
+ gpio-reserved-ranges:
+ description: |
+ Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+ used to mark the pins which should not be configured for GPIO. Please see
+ the ../gpio/gpio.txt for more information.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - "#clock-cells"
+ - regulators
+ - gpio-controller
+ - "#gpio-cells"
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic: pmic@4b {
+ compatible = "rohm,bd71828";
+ reg = <0x4b>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+ clocks = <&osc 0>;
+ #clock-cells = <0>;
+ clock-output-names = "bd71828-32k-out";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-reserved-ranges = <0 1>, <2 1>;
+
+ rohm,charger-sense-resistor-ohms = <10000000>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <2500>;
+ };
+ buck2: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <2500>;
+ };
+ buck3: BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2000000>;
+ };
+ buck4: BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ buck5: BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ buck6: BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <2500>;
+ };
+ buck7: BUCK7 {
+ regulator-name = "buck7";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <2500>;
+ };
+ ldo1: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo2: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo3: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo4: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo5: LDO5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo6: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ ldo7_reg: LDO7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ leds {
+ compatible = "rohm,bd71828-leds";
+
+ led-1 {
+ rohm,led-compatible = "bd71828-grnled";
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led-2 {
+ rohm,led-compatible = "bd71828-ambled";
+ function = LED_FUNCTION_CHARGING;
+ color = <LED_COLOR_ID_AMBER>;
+ };
+ };
+ };
+ };
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

\
 
 \ /
  Last update: 2019-12-19 10:47    [W:0.164 / U:4.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site