lkml.org 
[lkml]   [2019]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH v1 02/15] dt-bindings:phy: Convert Cadence MHDP PHY bindings to YAML.
On Wed, Dec 11, 2019 at 02:09:07PM +0100, Yuti Amonkar wrote:
> - Convert the MHDP PHY devicetree bindings to yaml schemas.
> - Rename DP PHY to have generic Torrent PHY nomrnclature.
> - Rename compatible string from "cdns,dp-phy" to "cdns,torrent-phy".

You can't just change compatible strings. It's an ABI. Unless you know
for sure there are no users that would care.

>
> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com>
> ---
> .../devicetree/bindings/phy/phy-cadence-dp.txt | 30 ------------
> .../bindings/phy/phy-cadence-torrent.yaml | 57 ++++++++++++++++++++++
> 2 files changed, 57 insertions(+), 30 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
> create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt b/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
> deleted file mode 100644
> index 7f49fd54e..0000000
> --- a/Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -Cadence MHDP DisplayPort SD0801 PHY binding
> -===========================================
> -
> -This binding describes the Cadence SD0801 PHY hardware included with
> -the Cadence MHDP DisplayPort controller.
> -
> --------------------------------------------------------------------------------
> -Required properties (controller (parent) node):
> -- compatible : Should be "cdns,dp-phy"
> -- reg : Defines the following sets of registers in the parent
> - mhdp device:
> - - Offset of the DPTX PHY configuration registers
> - - Offset of the SD0801 PHY configuration registers
> -- #phy-cells : from the generic PHY bindings, must be 0.
> -
> -Optional properties:
> -- num_lanes : Number of DisplayPort lanes to use (1, 2 or 4)
> -- max_bit_rate : Maximum DisplayPort link bit rate to use, in Mbps (2160,
> - 2430, 2700, 3240, 4320, 5400 or 8100)
> --------------------------------------------------------------------------------
> -
> -Example:
> - dp_phy: phy@f0fb030a00 {
> - compatible = "cdns,dp-phy";
> - reg = <0xf0 0xfb030a00 0x0 0x00000040>,
> - <0xf0 0xfb500000 0x0 0x00100000>;
> - num_lanes = <4>;
> - max_bit_rate = <8100>;
> - #phy-cells = <0>;
> - };
> diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
> new file mode 100644
> index 0000000..4fa9d0a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml

Normal file naming is using the compatible string.

> @@ -0,0 +1,57 @@
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Cadence Torrent SD0801 PHY binding for DisplayPort
> +
> +description:
> + This binding describes the Cadence SD0801 PHY hardware included with
> + the Cadence MHDP DisplayPort controller.
> +
> +maintainers:
> + - Swapnil Jakhade <sjakhade@cadence.com>
> + - Yuti Amonkar <yamonkar@cadence.com>
> +
> +properties:
> + compatible:
> + const: cdns,torrent-phy
> +
> + reg:
> + items:
> + - description: Offset of the DPTX PHY configuration registers.
> + - description: Offset of the SD0801 PHY configuration registers.
> +
> + "#phy-cells":
> + const: 0
> +
> + num_lanes:
> + description:
> + Number of DisplayPort lanes.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [1, 2, 4]
> +
> + max_bit_rate:
> + description:
> + Maximum DisplayPort link bit rate to use, in Mbps
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [2160, 2430, 2700, 3240, 4320, 5400, 8100]
> +
> +required:
> + - compatible
> + - reg
> + - "#phy-cells"
> +
> +examples:
> + - |
> + dp_phy: phy@f0fb030a00 {
> + compatible = "cdns,torrent-phy";
> + reg = <0xf0 0xfb030a00 0x0 0x00000040>,
> + <0xf0 0xfb500000 0x0 0x00100000>;
> + num_lanes = <4>;
> + max_bit_rate = <8100>;
> + #phy-cells = <0>;
> + };
> +...
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2019-12-19 22:11    [W:0.168 / U:7.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site