lkml.org 
[lkml]   [2019]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 06/12] ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30/114/124
Date
The early-resume code shall not switch CPU to PLLX because PLLX
configuration could be unstable or PLLX should be simply disabled if
CPU enters into suspend running off some other PLL (the case if CPUFREQ
driver is active). The actual burst policy is restored by the clock
drivers.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
arch/arm/mach-tegra/sleep-tegra30.S | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 3341a12bbb9c..9a20c93abe48 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -383,11 +383,8 @@ _pll_m_c_x_done:
ldr r4, [r5, #0x1C] @ restore SCLK_BURST
str r4, [r0, #CLK_RESET_SCLK_BURST]

- cmp r10, #TEGRA30
- movweq r4, #:lower16:((1 << 28) | (0x8)) @ burst policy is PLLX
- movteq r4, #:upper16:((1 << 28) | (0x8))
- movwne r4, #:lower16:((1 << 28) | (0xe))
- movtne r4, #:upper16:((1 << 28) | (0xe))
+ movw r4, #:lower16:((1 << 28) | (0x4)) @ burst policy is PLLP
+ movt r4, #:upper16:((1 << 28) | (0x4))
str r4, [r0, #CLK_RESET_CCLK_BURST]

/* Restore pad power state to normal */
--
2.24.0
\
 
 \ /
  Last update: 2019-12-18 21:23    [W:0.076 / U:1.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site