[lkml]   [2019]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/6] fixes for atmel-hlcdc

I have few fixes for atmel-hlcdc driver in this series as well
as two reverts.
Revert "drm: atmel-hlcdc: enable sys_clk during initalization." is
due to the fix in in patch 2/5.

Thank you,
Claudiu Beznea

Changes in v3:
- changes dev_err() message in patch 4/6
- collect Acked-by tags

Changes in v2:
- introduce patch 3/6
- use dev_err() inpatch 4/6
- introduce patch 5/6 instead of reverting commit f6f7ad323461
("drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested")

Claudiu Beznea (5):
drm: atmel-hlcdc: use double rate for pixel clock only if supported
drm: atmel-hlcdc: enable clock before configuring timing engine
mfd: atmel-hlcdc: add struct device member to struct
mfd: atmel-hlcdc: return in case of error
Revert "drm: atmel-hlcdc: enable sys_clk during initalization."

Peter Rosin (1):
drm: atmel-hlcdc: prefer a lower pixel-clock than requested

drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 18 ++++++++++++------
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 19 +------------------
drivers/mfd/atmel-hlcdc.c | 18 ++++++++++++++----
3 files changed, 27 insertions(+), 28 deletions(-)


 \ /
  Last update: 2019-12-18 13:29    [W:0.105 / U:1.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site