lkml.org 
[lkml]   [2019]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: pinctrl: intel: Update to use generic bindings
Date
Kernel 5.5 adds generic pin mux & cfg node schema. Update pinctrl bindings
for LGM to use these newly added schemas. Also, rename filename to match
the compatible string.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
---
.../devicetree/bindings/pinctrl/intel,lgm-io.yaml | 76 ++++++++++++++
.../bindings/pinctrl/intel,lgm-pinctrl.yaml | 116 ---------------------
2 files changed, 76 insertions(+), 116 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
delete mode 100644 Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
new file mode 100644
index 000000000000..a386fb520510
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/pinctrl/intel,lgm-io.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain SoC pinmux & GPIO controller binding
+
+maintainers:
+ - Rahul Tanwar <rahul.tanwar@linux.intel.com>
+
+description: |
+ Pinmux & GPIO controller controls pin multiplexing & configuration including
+ GPIO function selection & GPIO attributes configuration.
+
+allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+properties:
+ compatible:
+ const: intel,lgm-io
+
+ reg:
+ maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+ '-pins$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ function: true
+ group: true
+ pins: true
+ pinmux: true
+ bias-pull-up: true
+ bias-pull-down: true
+ drive-strength: true
+ slew-rate: true
+ drive-open-drain: true
+ output-enable: true
+
+ required:
+ - function
+ - group
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl: pinctrl@e2880000 {
+ compatible = "intel,lgm-io";
+ reg = <0xe2880000 0x100000>;
+
+ uart0-pins {
+ pins = <64>, /* UART_RX0 */
+ <65>; /* UART_TX0 */
+ function = "CONSOLE_UART0";
+ pinmux = <1>,
+ <1>;
+ groups = "CONSOLE_UART0";
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml
deleted file mode 100644
index 240d429f773b..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml
+++ /dev/null
@@ -1,116 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/bindings/pinctrl/intel,lgm-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Intel Lightning Mountain SoC pinmux & GPIO controller binding
-
-maintainers:
- - Rahul Tanwar <rahul.tanwar@linux.intel.com>
-
-description: |
- Pinmux & GPIO controller controls pin multiplexing & configuration including
- GPIO function selection & GPIO attributes configuration.
-
- Please refer to [1] for details of the common pinctrl bindings used by the
- client devices.
-
- [1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-properties:
- compatible:
- const: intel,lgm-io
-
- reg:
- maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
- '-pins$':
- type: object
- description:
- Pinctrl node's client devices use subnodes for desired pin configuration.
- Client device subnodes use below standard properties.
-
- properties:
- function:
- $ref: /schemas/types.yaml#/definitions/string
- description:
- A string containing the name of the function to mux to the group.
-
- groups:
- $ref: /schemas/types.yaml#/definitions/string-array
- description:
- An array of strings identifying the list of groups.
-
- pins:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- description:
- List of pins to select with this function.
-
- pinmux:
- description: The applicable mux group.
- allOf:
- - $ref: "/schemas/types.yaml#/definitions/uint32-array"
-
- bias-pull-up:
- type: boolean
-
- bias-pull-down:
- type: boolean
-
- drive-strength:
- description: |
- Selects the drive strength for the specified pins in mA.
- 0: 2 mA
- 1: 4 mA
- 2: 8 mA
- 3: 12 mA
- allOf:
- - $ref: /schemas/types.yaml#/definitions/uint32
- - enum: [0, 1, 2, 3]
-
- slew-rate:
- type: boolean
- description: |
- Sets slew rate for specified pins.
- 0: slow slew
- 1: fast slew
-
- drive-open-drain:
- type: boolean
-
- output-enable:
- type: boolean
-
- required:
- - function
- - groups
-
- additionalProperties: false
-
-required:
- - compatible
- - reg
-
-additionalProperties: false
-
-examples:
- # Pinmux controller node
- - |
- pinctrl: pinctrl@e2880000 {
- compatible = "intel,lgm-pinctrl";
- reg = <0xe2880000 0x100000>;
-
- uart0-pins {
- pins = <64>, /* UART_RX0 */
- <65>; /* UART_TX0 */
- function = "CONSOLE_UART0";
- pinmux = <1>,
- <1>;
- groups = "CONSOLE_UART0";
- };
- };
-
-...
--
2.11.0
\
 
 \ /
  Last update: 2019-12-18 07:21    [W:0.046 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site