lkml.org 
[lkml]   [2019]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] phy: qcom-qmp: Add MSM8996 UFS QMP support
On 07-12-19, 12:21, Bjorn Andersson wrote:
> The support for the 14nm MSM8996 UFS PHY is currently handled by the
> UFS-specific 14nm QMP driver, due to the earlier need for additional
> operations beyond the standard PHY API.
>
> Add support for this PHY to the common QMP driver, to allow us to remove
> the old driver.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> .../devicetree/bindings/phy/qcom-qmp-phy.txt | 5 +
> drivers/phy/qualcomm/phy-qcom-qmp.c | 106 ++++++++++++++++++
> 2 files changed, 111 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index eac9ad3cbbc8..5b99cf081817 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -8,6 +8,7 @@ Required properties:
> - compatible: compatible list, contains:
> "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
> "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
> + "qcom,msm8996-qmp-ufs-phy" for 14nm UFS phy on msm8996,
> "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
> "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
> "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
> @@ -44,6 +45,8 @@ Required properties:
> For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
> For "qcom,msm8996-qmp-pcie-phy" must contain:
> "aux", "cfg_ahb", "ref".
> + For "qcom,msm8996-qmp-ufs-phy" must contain:
> + "ref".
> For "qcom,msm8996-qmp-usb3-phy" must contain:
> "aux", "cfg_ahb", "ref".
> For "qcom,msm8998-qmp-usb3-phy" must contain:
> @@ -72,6 +75,8 @@ Required properties:
> "phy", "common".
> For "qcom,msm8996-qmp-pcie-phy" must contain:
> "phy", "common", "cfg".
> + For "qcom,msm8996-qmp-ufs-phy": must contain:
> + "ufsphy".
> For "qcom,msm8996-qmp-usb3-phy" must contain
> "phy", "common".
> For "qcom,msm8998-qmp-usb3-phy" must contain
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index a6b8fc5798e2..d81516c4d747 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -121,6 +121,11 @@ enum qphy_reg_layout {
> QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
> };
>
> +static const unsigned int msm8996_ufsphy_regs_layout[] = {
> + [QPHY_START_CTRL] = 0x00,
> + [QPHY_PCS_READY_STATUS] = 0x168,
> +};
> +
> static const unsigned int pciephy_regs_layout[] = {
> [QPHY_COM_SW_RESET] = 0x400,
> [QPHY_COM_POWER_DOWN_CONTROL] = 0x404,
> @@ -330,6 +335,75 @@ static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = {
> QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03),
> };
>
> +static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
> + QMP_PHY_INIT_CFG(QPHY_POWER_DOWN_CONTROL, 0x01),

Can you check this after adding the reset for ufs, I suspect you might
run into same issue as I am seeing on 8150, power down here does not
seem correct.

--
~Vinod

\
 
 \ /
  Last update: 2019-12-19 05:22    [W:0.052 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site