lkml.org 
[lkml]   [2019]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 3/4] dt-bindings: Add binding for IT6505.
On Sat, Dec 14, 2019 at 09:21:45AM +0100, Sam Ravnborg wrote:
> Hi Allen.
>
> On Tue, Dec 10, 2019 at 01:53:41PM +0800, allen wrote:
> > Add a DT binding documentation for IT6505.
> >
> > Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
> > Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
> > ---
> > .../bindings/display/bridge/ite,it6505.yaml | 99 ++++++++++++++++++++++
> > 1 file changed, 99 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> > new file mode 100644
> > index 00000000..23a106a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
> > @@ -0,0 +1,99 @@
> > +# SPDX-License-Identifier: GPL-2.0
> Please dual license new bindings like this:
>
> (GPL-2.0-only OR BSD-2-Clause)
>
>
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/ite,it6505.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ITE it6505 Device Tree Bindings
> > +
> > +maintainers:
> > + - Allen Chen <allen.chen@ite.com.tw>
> > +
> > +description: |
> > + The IT6505 is a high-performance DisplayPort 1.1a transmitter,
> > +fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications.
> > +The IT6505 supports color depth of up to 36 bits (12 bits/color)
> > +and ensures robust transmission of high-quality uncompressed video
> > +content, along with uncompressed and compressed digital audio content.
> Can we get consistent indent of the text here.

Pretty sure that's not even valid YAML.

> With this fixed:
> Acked-by: Sam Ravnborg <sam@ravnborg.org>
>
> > +
> > + Aside from the various video output formats supported, the IT6505
> > +also encodes and transmits up to 8 channels of I2S digital audio,
> > +with sampling rate up to 192kHz and sample size up to 24 bits.
> > +In addition, an S/PDIF input port takes in compressed audio of up to
> > +192kHz frame rate.
> > +
> > + Each IT6505 chip comes preprogrammed with an unique HDCP key,
> > +in compliance with the HDCP 1.3 standard so as to provide secure
> > +transmission of high-definition content. Users of the IT6505 need not
> > +purchase any HDCP keys or ROMs.
> > +
> > +properties:
> > + compatible:
> > + const: ite,it6505
> > +
> > + reg:
> > + - maxItems: 1
> > + - description: i2c address of the bridge

And this is not valid json-schema. The '-' means list and properties
aren't lists.

Run 'make dt_binding_check' and fix all the errors. See
Documentation/devicetree/bindings/writing-schema.rst.

> > +
> > + ovdd-supply:
> > + - maxItems: 1
> > + - description: I/O voltage
> > +
> > + pwr18-supply:
> > + - maxItems: 1
> > + - description: core voltage
> > +
> > + interrupts:
> > + - maxItems: 1
> > + - description: interrupt specifier of INT pin
> > +
> > + reset-gpios:
> > + - maxItems: 1
> > + - description: gpio specifier of RESET pin
> > +
> > + hpd-gpios:

Is HPD attached to the DP bridge or the DP connector. For the latter,
then this property goes in a connector node.

> > + - maxItems: 1
> > + - description:
> > + - Hotplug detect GPIO
> > + - Indicates which GPIO should be used for hotplug detection
> > +
> > + extcon:

Don't use extcon. Deprecated.

> > + - maxItems: 1
> > + - description: extcon specifier for the Power Delivery
> > +
> > + port:
> > + - type: object
> > + - description: A port node pointing to DPI host port node
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - ovdd-supply
> > + - pwr18-supply
> > + - interrupts
> > + - reset-gpios
> > + - hpd-gpios
> > + - extcon
> > +
> > +examples:
> > + - |
> > + dp-bridge@5c {
> > + compatible = "ite,it6505";
> > + interrupts = <152 IRQ_TYPE_EDGE_RISING 152 0>;
> > + reg = <0x5c>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&it6505_pins>;
> > + ovdd-supply = <&mt6358_vsim1_reg>;
> > + pwr18-supply = <&it6505_pp18_reg>;
> > + reset-gpios = <&pio 179 1>;
> > + hpd-gpios = <&pio 9 0>;
> > + extcon = <&usbc_extcon>;
> > +
> > + port {
> > + it6505_in: endpoint {
> > + remote-endpoint = <&dpi_out>;
> > + };
> > + };
> > + };
> > +
> > +---

\
 
 \ /
  Last update: 2019-12-18 21:30    [W:0.029 / U:13.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site