lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/7] usb: musb: dma: Add support for shared IRQ
Hi Paul,

On Wed, Dec 11, 2019 at 12:52:24PM -0600, Bin Liu wrote:
> On Tue, Dec 10, 2019 at 06:11:05PM +0100, Paul Cercueil wrote:
> > The implementation of the Inventra IP in some of the Ingenic JZ47xx SoCs
> > does not use a separate IRQ line for DMA transfers.
> >
> > Allow these SoCs to be supported by adding a flag 'dma_share_usb_irq'
> > in the struct musb. If set, no extra IRQ line is required, and the musb
> > glue will need to call the API function musbhs_dma_controller_irq()
> > within its interrupt handler.
> >
> > Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> > Tested-by: Artur Rojek <contact@artur-rojek.eu>
> > ---
>
> Queued for usb-next. Thanks.

I removed this and the next patch [3/7] in this series from my queue.
Sorry. Ming Guo has posted a series "Add MediaTek MUSB Controller
Driver" which has done the similar implementation [1] but without adding
the flag in struct musb. Can you please check if you can use Ming's
implementation instead? The patch of his musb glue driver which uses the
implementation is [2], just for your reference.

[1] https://marc.info/?l=linux-usb&m=157602930627195&w=2
[2] https://marc.info/?l=linux-usb&m=157602932427210&w=2

Thanks,
-Bin.

\
 
 \ /
  Last update: 2019-12-17 15:43    [W:0.045 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site