lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [EXT] Re: [v11 2/2] clk: ls1028a: Add clock driver for Display output interface
Date


> -----Original Message-----
> From: Stephen Boyd <sboyd@kernel.org>
> Sent: 2019年12月17日 1:56
> To: Leo Li <leoyang.li@nxp.com>; Mark Rutland <mark.rutland@arm.com>;
> Michael Turquette <mturquette@baylibre.com>; Michael Walle
> <michael@walle.cc>; Rob Herring <robh+dt@kernel.org>; Wen He
> <wen.he_1@nxp.com>; devicetree@vger.kernel.org; linux-clk@vger.kernel.org;
> linux-kernel@vger.kernel.org
> Subject: [EXT] Re: [v11 2/2] clk: ls1028a: Add clock driver for Display output
> interface
>
> Caution: EXT Email
>
> Quoting Michael Walle (2019-12-12 16:06:16)
> > Am 12. Dezember 2019 23:18:16 MEZ schrieb Stephen Boyd
> <sboyd@kernel.org>:
> > >Quoting Wen He (2019-12-04 23:26:53)
> > >> Add clock driver for QorIQ LS1028A Display output interfaces(LCD,
> > >DPHY),
> > >> as implemented in TSMC CLN28HPM PLL, this PLL supports the
> > >programmable
> > >> integer division and range of the display output pixel clock's
> > >27-594MHz.
> > >>
> > >> Signed-off-by: Wen He <wen.he_1@nxp.com>
> > >> Signed-off-by: Michael Walle <michael@walle.cc>
> > >
> > >Is Michael the author? SoB chain is backwards here.
> >
> > the original driver was from Wen. I've just supplied some code and the
> > vco frequency stuff. so its basically a sob of us both.
> >
> > -michael
>
> Ok. That's a Co-developed-by: tag then. Thanks for letting us know.

The v12 version patch was sent out.
Does need I change the author sign to below?

Co-developed-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Wen He <wen.he_1@nxp.com>
Co-developed-by: Michael Walle <michael.@walle.cc>
Signed-off-by: Michael Walle <michael.@walle.cc>
Signed-off-by: Wen He <wen.he_1@nxp.com>

Best Regards,
Wen


\
 
 \ /
  Last update: 2019-12-17 08:09    [W:0.041 / U:1.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site