lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928
Date
The ad7928 is software compatible with the ad7923.
The ad7908 and ad7918 are the 8 and 10-bit versions of the ad7928.

Signed-off-by: Daniel Junho <djunho@gmail.com>
---
drivers/iio/adc/ad7923.c | 57 +++++++++++++++++++++++++++++++++++-----
1 file changed, 50 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c
index 6d56fa0b9e30..1077036d1ed8 100644
--- a/drivers/iio/adc/ad7923.c
+++ b/drivers/iio/adc/ad7923.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * AD7904/AD7914/AD7923/AD7924 SPI ADC driver
+ * AD7904/AD7914/AD7923/AD7924/AD7908/AD7918/AD7928 SPI ADC driver
*
* Copyright 2011 Analog Devices Inc (from AD7923 Driver)
* Copyright 2012 CS Systemes d'Information
@@ -29,11 +29,13 @@
#define AD7923_PM_MODE_AS (1) /* auto shutdown */
#define AD7923_PM_MODE_FS (2) /* full shutdown */
#define AD7923_PM_MODE_OPS (3) /* normal operation */
-#define AD7923_SEQUENCE_OFF (0) /* no sequence fonction */
-#define AD7923_SEQUENCE_PROTECT (2) /* no interrupt write cycle */
-#define AD7923_SEQUENCE_ON (3) /* continuous sequence */

-#define AD7923_MAX_CHAN 4
+#define AD7923_SEQUENCE_OFF (0x00) /* no sequence function */
+#define AD7908_SEQUENCE_SHADOW (0x01) /* use the shadow register
+ * for programming
+ */
+#define AD7923_SEQUENCE_PROTECT (0x10) /* no interrupt write cycle */
+#define AD7923_SEQUENCE_ON (0x11) /* continuous sequence */

#define AD7923_PM_MODE_WRITE(mode) ((mode) << 4) /* write mode */
#define AD7923_CHANNEL_WRITE(channel) ((channel) << 6) /* write channel */
@@ -74,6 +76,9 @@ enum ad7923_id {
AD7904,
AD7914,
AD7924,
+ AD7908,
+ AD7918,
+ AD7928
};

#define AD7923_V_CHAN(index, bits) \
@@ -102,9 +107,25 @@ const struct iio_chan_spec name ## _channels[] = { \
IIO_CHAN_SOFT_TIMESTAMP(4), \
}

+#define DECLARE_AD7908_CHANNELS(name, bits) \
+const struct iio_chan_spec name ## _channels[] = { \
+ AD7923_V_CHAN(0, bits), \
+ AD7923_V_CHAN(1, bits), \
+ AD7923_V_CHAN(2, bits), \
+ AD7923_V_CHAN(3, bits), \
+ AD7923_V_CHAN(4, bits), \
+ AD7923_V_CHAN(5, bits), \
+ AD7923_V_CHAN(6, bits), \
+ AD7923_V_CHAN(7, bits), \
+ IIO_CHAN_SOFT_TIMESTAMP(8), \
+}
+
static DECLARE_AD7923_CHANNELS(ad7904, 8);
static DECLARE_AD7923_CHANNELS(ad7914, 10);
static DECLARE_AD7923_CHANNELS(ad7924, 12);
+static DECLARE_AD7908_CHANNELS(ad7908, 8);
+static DECLARE_AD7908_CHANNELS(ad7918, 10);
+static DECLARE_AD7908_CHANNELS(ad7928, 12);

static const struct ad7923_chip_info ad7923_chip_info[] = {
[AD7904] = {
@@ -119,6 +140,18 @@ static const struct ad7923_chip_info ad7923_chip_info[] = {
.channels = ad7924_channels,
.num_channels = ARRAY_SIZE(ad7924_channels),
},
+ [AD7908] = {
+ .channels = ad7908_channels,
+ .num_channels = ARRAY_SIZE(ad7908_channels),
+ },
+ [AD7918] = {
+ .channels = ad7918_channels,
+ .num_channels = ARRAY_SIZE(ad7918_channels),
+ },
+ [AD7928] = {
+ .channels = ad7928_channels,
+ .num_channels = ARRAY_SIZE(ad7928_channels),
+ },
};

/**
@@ -131,7 +164,11 @@ static int ad7923_update_scan_mode(struct iio_dev *indio_dev,
int i, cmd, len;

len = 0;
- for_each_set_bit(i, active_scan_mask, AD7923_MAX_CHAN) {
+ /*
+ * For this driver the last channel is always the software timestamp so
+ * skip that one.
+ */
+ for_each_set_bit(i, active_scan_mask, indio_dev->num_channels - 1) {
cmd = AD7923_WRITE_CR | AD7923_CHANNEL_WRITE(i) |
AD7923_SEQUENCE_WRITE(AD7923_SEQUENCE_OFF) |
st->settings;
@@ -344,6 +381,9 @@ static const struct spi_device_id ad7923_id[] = {
{"ad7914", AD7914},
{"ad7923", AD7924},
{"ad7924", AD7924},
+ {"ad7908", AD7908},
+ {"ad7918", AD7918},
+ {"ad7928", AD7928},
{}
};
MODULE_DEVICE_TABLE(spi, ad7923_id);
@@ -353,6 +393,9 @@ static const struct of_device_id ad7923_of_match[] = {
{ .compatible = "adi,ad7914", },
{ .compatible = "adi,ad7923", },
{ .compatible = "adi,ad7924", },
+ { .compatible = "adi,ad7908", },
+ { .compatible = "adi,ad7918", },
+ { .compatible = "adi,ad7928", },
{ },
};
MODULE_DEVICE_TABLE(of, ad7923_of_match);
@@ -370,5 +413,5 @@ module_spi_driver(ad7923_driver);

MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
MODULE_AUTHOR("Patrick Vasseur <patrick.vasseur@c-s.fr>");
-MODULE_DESCRIPTION("Analog Devices AD7904/AD7914/AD7923/AD7924 ADC");
+MODULE_DESCRIPTION("Analog Devices AD7923 and similar ADC");
MODULE_LICENSE("GPL v2");
--
2.24.1
\
 
 \ /
  Last update: 2019-12-17 12:13    [W:0.068 / U:8.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site