lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/6] dt-bindings: dma: Convert stm32 DMA bindings to json-schema
Date
Convert the STM32 DMA binding to DT schema format using json-schema

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
---
.../devicetree/bindings/dma/st,stm32-dma.yaml | 102 +++++++++++++++++++++
.../devicetree/bindings/dma/stm32-dma.txt | 83 -----------------
2 files changed, 102 insertions(+), 83 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
delete mode 100644 Documentation/devicetree/bindings/dma/stm32-dma.txt

diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
new file mode 100644
index 000000000000..0c0ac11ad55f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA Controller bindings
+
+description: |
+ The STM32 DMA is a general-purpose direct memory access controller capable of
+ supporting 8 independent DMA channels. Each channel can have up to 8 requests.
+ DMA clients connected to the STM32 DMA controller must use the format
+ described in the dma.txt file, using a four-cell specifier for each
+ channel: a phandle to the DMA controller plus the following four integer cells:
+ 1. The channel id
+ 2. The request line number
+ 3. A 32bit mask specifying the DMA channel configuration which are device
+ dependent:
+ -bit 9: Peripheral Increment Address
+ 0x0: no address increment between transfers
+ 0x1: increment address between transfers
+ -bit 10: Memory Increment Address
+ 0x0: no address increment between transfers
+ 0x1: increment address between transfers
+ -bit 15: Peripheral Increment Offset Size
+ 0x0: offset size is linked to the peripheral bus width
+ 0x1: offset size is fixed to 4 (32-bit alignment)
+ -bit 16-17: Priority level
+ 0x0: low
+ 0x1: medium
+ 0x2: high
+ 0x3: very high
+ 4. A 32bit bitfield value specifying DMA features which are device dependent:
+ -bit 0-1: DMA FIFO threshold selection
+ 0x0: 1/4 full FIFO
+ 0x1: 1/2 full FIFO
+ 0x2: 3/4 full FIFO
+ 0x3: full FIFO
+
+maintainers:
+ - Amelie Delaunay <amelie.delaunay@st.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 4
+
+ compatible:
+ const: st,stm32-dma
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 8
+ description: Should contain all of the per-channel DMA
+ interrupts in ascending order with respect to the
+ DMA channel index.
+
+ resets:
+ maxItems: 1
+
+ st,mem2mem:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: if defined, it indicates that the controller
+ supports memory-to-memory transfer
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ dma-controller@40026400 {
+ compatible = "st,stm32-dma";
+ reg = <0x40026400 0x400>;
+ interrupts = <56>,
+ <57>,
+ <58>,
+ <59>,
+ <60>,
+ <68>,
+ <69>,
+ <70>;
+ clocks = <&clk_hclk>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ resets = <&rcc 150>;
+ dma-requests = <8>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt
deleted file mode 100644
index c5f519097204..000000000000
--- a/Documentation/devicetree/bindings/dma/stm32-dma.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* STMicroelectronics STM32 DMA controller
-
-The STM32 DMA is a general-purpose direct memory access controller capable of
-supporting 8 independent DMA channels. Each channel can have up to 8 requests.
-
-Required properties:
-- compatible: Should be "st,stm32-dma"
-- reg: Should contain DMA registers location and length. This should include
- all of the per-channel registers.
-- interrupts: Should contain all of the per-channel DMA interrupts in
- ascending order with respect to the DMA channel index.
-- clocks: Should contain the input clock of the DMA instance.
-- #dma-cells : Must be <4>. See DMA client paragraph for more details.
-
-Optional properties:
-- dma-requests : Number of DMA requests supported.
-- resets: Reference to a reset controller asserting the DMA controller
-- st,mem2mem: boolean; if defined, it indicates that the controller supports
- memory-to-memory transfer
-
-Example:
-
- dma2: dma-controller@40026400 {
- compatible = "st,stm32-dma";
- reg = <0x40026400 0x400>;
- interrupts = <56>,
- <57>,
- <58>,
- <59>,
- <60>,
- <68>,
- <69>,
- <70>;
- clocks = <&clk_hclk>;
- #dma-cells = <4>;
- st,mem2mem;
- resets = <&rcc 150>;
- dma-requests = <8>;
- };
-
-* DMA client
-
-DMA clients connected to the STM32 DMA controller must use the format
-described in the dma.txt file, using a four-cell specifier for each
-channel: a phandle to the DMA controller plus the following four integer cells:
-
-1. The channel id
-2. The request line number
-3. A 32bit mask specifying the DMA channel configuration which are device
- dependent:
- -bit 9: Peripheral Increment Address
- 0x0: no address increment between transfers
- 0x1: increment address between transfers
- -bit 10: Memory Increment Address
- 0x0: no address increment between transfers
- 0x1: increment address between transfers
- -bit 15: Peripheral Increment Offset Size
- 0x0: offset size is linked to the peripheral bus width
- 0x1: offset size is fixed to 4 (32-bit alignment)
- -bit 16-17: Priority level
- 0x0: low
- 0x1: medium
- 0x2: high
- 0x3: very high
-4. A 32bit bitfield value specifying DMA features which are device dependent:
- -bit 0-1: DMA FIFO threshold selection
- 0x0: 1/4 full FIFO
- 0x1: 1/2 full FIFO
- 0x2: 3/4 full FIFO
- 0x3: full FIFO
-
-
-Example:
-
- usart1: serial@40011000 {
- compatible = "st,stm32-uart";
- reg = <0x40011000 0x400>;
- interrupts = <37>;
- clocks = <&clk_pclk2>;
- dmas = <&dma2 2 4 0x10400 0x3>,
- <&dma2 7 5 0x10200 0x3>;
- dma-names = "rx", "tx";
- };
--
2.15.0
\
 
 \ /
  Last update: 2019-12-17 10:23    [W:0.058 / U:2.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site