lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] nvmem: add QTI SDAM driver
Date
QTI SDAM driver allows PMIC peripherals to access the shared memory
that is available on QTI PMICs.

Change-Id: I40005646ab1fbba9e0e4aa68e0a61cfbc7b51ba6
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
---
drivers/nvmem/Kconfig | 8 ++
drivers/nvmem/Makefile | 1 +
drivers/nvmem/qcom-spmi-sdam.c | 197 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 206 insertions(+)
create mode 100644 drivers/nvmem/qcom-spmi-sdam.c

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 73567e9..35efab1 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -109,6 +109,14 @@ config QCOM_QFPROM
This driver can also be built as a module. If so, the module
will be called nvmem_qfprom.

+config NVMEM_SPMI_SDAM
+ tristate "SPMI SDAM Support"
+ depends on SPMI
+ help
+ This driver supports the Shared Direct Access Memory Module on
+ Qualcomm Technologies, Inc. PMICs. It provides the clients
+ an interface to read/write to the SDAM module's shared memory.
+
config ROCKCHIP_EFUSE
tristate "Rockchip eFuse Support"
depends on ARCH_ROCKCHIP || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 9e66782..877a0b0 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o
nvmem_mtk-efuse-y := mtk-efuse.o
obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o
nvmem_qfprom-y := qfprom.o
+obj-$(CONFIG_NVMEM_SPMI_SDAM) += qcom-spmi-sdam.o
obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o
nvmem_rockchip_efuse-y := rockchip-efuse.o
obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o
diff --git a/drivers/nvmem/qcom-spmi-sdam.c b/drivers/nvmem/qcom-spmi-sdam.c
new file mode 100644
index 0000000..e80a446
--- /dev/null
+++ b/drivers/nvmem/qcom-spmi-sdam.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/nvmem-provider.h>
+#include <linux/regmap.h>
+
+#define SDAM_MEM_START 0x40
+#define REGISTER_MAP_ID 0x40
+#define REGISTER_MAP_VERSION 0x41
+#define SDAM_SIZE 0x44
+#define SDAM_PBS_TRIG_SET 0xE5
+#define SDAM_PBS_TRIG_CLR 0xE6
+
+struct sdam_chip {
+ struct platform_device *pdev;
+ struct regmap *regmap;
+ int base;
+ int size;
+};
+
+/* read only register offsets */
+static const u8 sdam_ro_map[] = {
+ REGISTER_MAP_ID,
+ REGISTER_MAP_VERSION,
+ SDAM_SIZE
+};
+
+static bool is_valid(struct sdam_chip *sdam, unsigned int offset, size_t len)
+{
+ int sdam_mem_end = SDAM_MEM_START + sdam->size - 1;
+
+ if (!len)
+ return false;
+
+ if (offset >= SDAM_MEM_START && offset <= sdam_mem_end
+ && (offset + len - 1) <= sdam_mem_end)
+ return true;
+ else if ((offset == SDAM_PBS_TRIG_SET || offset == SDAM_PBS_TRIG_CLR)
+ && (len == 1))
+ return true;
+
+ return false;
+}
+
+static bool is_ro(unsigned int offset, size_t len)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sdam_ro_map); i++)
+ if (offset <= sdam_ro_map[i] && (offset + len) > sdam_ro_map[i])
+ return true;
+
+ return false;
+}
+
+static int sdam_read(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+ struct sdam_chip *sdam = priv;
+ int rc;
+
+ if (!is_valid(sdam, offset, bytes)) {
+ pr_err("Invalid SDAM offset 0x%02x len=%zd\n", offset, bytes);
+ return -EINVAL;
+ }
+
+ rc = regmap_bulk_read(sdam->regmap, sdam->base + offset, val, bytes);
+ if (rc < 0)
+ pr_err("Failed to read SDAM offset 0x%02x len=%zd, rc=%d\n",
+ offset, bytes, rc);
+
+ return rc;
+}
+
+static int sdam_write(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+ struct sdam_chip *sdam = priv;
+ int rc;
+
+ if (!is_valid(sdam, offset, bytes)) {
+ pr_err("Invalid SDAM offset 0x%02x len=%zd\n", offset, bytes);
+ return -EINVAL;
+ }
+
+ if (is_ro(offset, bytes)) {
+ pr_err("Invalid write offset 0x%02x len=%zd\n", offset, bytes);
+ return -EINVAL;
+ }
+
+ rc = regmap_bulk_write(sdam->regmap, sdam->base + offset, val, bytes);
+ if (rc < 0)
+ pr_err("Failed to write SDAM offset 0x%02x len=%zd, rc=%d\n",
+ offset, bytes, rc);
+
+ return rc;
+}
+
+static int sdam_probe(struct platform_device *pdev)
+{
+ struct sdam_chip *sdam;
+ struct nvmem_device *nvmem;
+ struct nvmem_config *sdam_config;
+ unsigned int val = 0;
+ int rc;
+
+ sdam = devm_kzalloc(&pdev->dev, sizeof(*sdam), GFP_KERNEL);
+ if (!sdam)
+ return -ENOMEM;
+
+ sdam_config = devm_kzalloc(&pdev->dev, sizeof(*sdam_config),
+ GFP_KERNEL);
+ if (!sdam_config)
+ return -ENOMEM;
+
+ sdam->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!sdam->regmap) {
+ pr_err("Failed to get regmap handle\n");
+ return -ENXIO;
+ }
+
+ rc = of_property_read_u32(pdev->dev.of_node, "reg", &sdam->base);
+ if (rc < 0) {
+ pr_err("Failed to get SDAM base, rc=%d\n", rc);
+ return -EINVAL;
+ }
+
+ rc = regmap_read(sdam->regmap, sdam->base + SDAM_SIZE, &val);
+ if (rc < 0) {
+ pr_err("Failed to read SDAM_SIZE rc=%d\n", rc);
+ return -EINVAL;
+ }
+ sdam->size = val * 32;
+
+ sdam_config->dev = &pdev->dev;
+ sdam_config->name = "spmi_sdam";
+ sdam_config->id = pdev->id;
+ sdam_config->owner = THIS_MODULE,
+ sdam_config->stride = 1;
+ sdam_config->word_size = 1;
+ sdam_config->reg_read = sdam_read;
+ sdam_config->reg_write = sdam_write;
+ sdam_config->priv = sdam;
+
+ nvmem = nvmem_register(sdam_config);
+ if (IS_ERR(nvmem)) {
+ pr_err("Failed to register SDAM nvmem device rc=%ld\n",
+ PTR_ERR(nvmem));
+ return -ENXIO;
+ }
+ platform_set_drvdata(pdev, nvmem);
+
+ pr_info("SDAM base=0x%04x size=%d registered successfully\n",
+ sdam->base, sdam->size);
+
+ return 0;
+}
+
+static int sdam_remove(struct platform_device *pdev)
+{
+ struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+ return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id sdam_match_table[] = {
+ {.compatible = "qcom,spmi-sdam"},
+ {},
+};
+
+static struct platform_driver sdam_driver = {
+ .driver = {
+ .name = "qcom,spmi-sdam",
+ .of_match_table = sdam_match_table,
+ },
+ .probe = sdam_probe,
+ .remove = sdam_remove,
+};
+
+static int __init sdam_init(void)
+{
+ return platform_driver_register(&sdam_driver);
+}
+subsys_initcall(sdam_init);
+
+static void __exit sdam_exit(void)
+{
+ return platform_driver_unregister(&sdam_driver);
+}
+module_exit(sdam_exit);
+
+MODULE_DESCRIPTION("QCOM SPMI SDAM driver");
+MODULE_LICENSE("GPL v2");
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2019-12-17 10:21    [W:0.052 / U:1.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site