lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] ARM: dts: am571x-idk: Fix gpios property to have the correct gpio number
Date
commit d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for
EP mode") while adding the dt node for EP mode for DRA7 platform,
added rc node for am571x-idk and populated gpios property with
"gpio3 23". However the GPIO_PCIE_SWRST line is actually connected
to "gpio5 18". Fix it here. (The patch adding "gpio3 23" was tested
with another am57x board in EP mode which doesn't rely on reset from
host).

Fixes: d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for
EP mode")
Cc: stable <stable@vger.kernel.org> # 4.14+

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/am571x-idk.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 67239f7c22b8..669559c9c95b 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -167,7 +167,7 @@

&pcie1_rc {
status = "okay";
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
};

&mmc1 {
--
2.17.1
\
 
 \ /
  Last update: 2019-12-17 09:50    [W:0.033 / U:3.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site