lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/4] ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity
On Wed, Dec 11, 2019 at 03:52:17PM +0100, Marek Szyprowski wrote:
> Current USB3503 driver ignores GPIO polarity and always operates as if the
> GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing
> USB3503 chip applications to match the chip specification and common
> convention for naming the pins. The only pin, which has to be ACTIVE_LOW
> is the reset pin. The remaining are ACTIVE_HIGH. This change allows later
> to fix the USB3503 driver to properly use generic GPIO bindings and read
> polarity from DT.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>

Applied, thanks

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-12-17 09:38    [W:0.072 / U:19.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site