lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dt-bindings: stm32: convert mlahb to json-schema
Date
Convert the ML-AHB bus bindings to DT schema format using json-schema

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
V2: Add "ranges" property as mandatory
---
.../devicetree/bindings/arm/stm32/mlahb.txt | 37 ----------
.../bindings/arm/stm32/st,mlahb.yaml | 70 +++++++++++++++++++
2 files changed, 70 insertions(+), 37 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/stm32/mlahb.txt
create mode 100644 Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml

diff --git a/Documentation/devicetree/bindings/arm/stm32/mlahb.txt b/Documentation/devicetree/bindings/arm/stm32/mlahb.txt
deleted file mode 100644
index 25307aa1eb9b..000000000000
--- a/Documentation/devicetree/bindings/arm/stm32/mlahb.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-ML-AHB interconnect bindings
-
-These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects
-a Cortex-M subsystem with dedicated memories.
-The MCU SRAM and RETRAM memory parts can be accessed through different addresses
-(see "RAM aliases" in [1]) using different buses (see [2]) : balancing the
-Cortex-M firmware accesses among those ports allows to tune the system
-performance.
-
-[1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf
-[2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
-
-Required properties:
-- compatible: should be "simple-bus"
-- dma-ranges: describes memory addresses translation between the local CPU and
- the remote Cortex-M processor. Each memory region, is declared with
- 3 parameters:
- - param 1: device base address (Cortex-M processor address)
- - param 2: physical base address (local CPU address)
- - param 3: size of the memory region.
-
-The Cortex-M remote processor accessed via the mlahb interconnect is described
-by a child node.
-
-Example:
-mlahb {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- dma-ranges = <0x00000000 0x38000000 0x10000>,
- <0x10000000 0x10000000 0x60000>,
- <0x30000000 0x30000000 0x60000>;
-
- m4_rproc: m4@10000000 {
- ...
- };
-};
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
new file mode 100644
index 000000000000..68917bb7c7e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 ML-AHB interconnect bindings
+
+maintainers:
+ - Fabien Dessenne <fabien.dessenne@st.com>
+ - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+
+description: |
+ These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects
+ a Cortex-M subsystem with dedicated memories. The MCU SRAM and RETRAM memory
+ parts can be accessed through different addresses (see "RAM aliases" in [1])
+ using different buses (see [2]): balancing the Cortex-M firmware accesses
+ among those ports allows to tune the system performance.
+ [1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf
+ [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
+
+allOf:
+ - $ref: /schemas/simple-bus.yaml#
+
+properties:
+ compatible:
+ contains:
+ enum:
+ - st,mlahb
+
+ dma-ranges:
+ description: |
+ Describe memory addresses translation between the local CPU and the
+ remote Cortex-M processor. Each memory region, is declared with
+ 3 parameters:
+ - param 1: device base address (Cortex-M processor address)
+ - param 2: physical base address (local CPU address)
+ - param 3: size of the memory region.
+ maxItems: 3
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - dma-ranges
+
+examples:
+ - |
+ mlahb: ahb {
+ compatible = "st,mlahb", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10000000 0x40000>;
+ ranges;
+ dma-ranges = <0x00000000 0x38000000 0x10000>,
+ <0x10000000 0x10000000 0x60000>,
+ <0x30000000 0x30000000 0x60000>;
+
+ m4_rproc: m4@10000000 {
+ reg = <0x10000000 0x40000>;
+ };
+ };
+
+...
--
2.17.1
\
 
 \ /
  Last update: 2019-12-17 09:25    [W:0.033 / U:3.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site