lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] tty: synclink: Adjust indentation and style in several functions
Date
Clang warns:

../drivers/tty/synclink.c:1167:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
if ( (status & RXSTATUS_ABORT_RECEIVED) &&
^
../drivers/tty/synclink.c:1163:2: note: previous statement is here
if ( debug_level >= DEBUG_LEVEL_ISR )
^
../drivers/tty/synclink.c:1973:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
^
../drivers/tty/synclink.c:1971:2: note: previous statement is here
if (I_INPCK(info->port.tty))
^
../drivers/tty/synclink.c:3229:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
usc_set_serial_signals(info);
^
../drivers/tty/synclink.c:3227:2: note: previous statement is here
else
^
../drivers/tty/synclink.c:4918:4: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
if ( info->params.clock_speed )
^
../drivers/tty/synclink.c:4901:3: note: previous statement is here
else
^
4 warnings generated.

The indentation on these lines is not at all consistent, tabs and spaces
are mixed together. Convert to just using tabs to be consistent with the
Linux kernel coding style and eliminate these warnings from clang.

Additionally, clean up some of lines touched by the indentation shift to
eliminate checkpatch warnings and leave this code in a better condition
than when it was left.

-:10: ERROR: trailing whitespace
-:10: ERROR: that open brace { should be on the previous line
-:10: ERROR: space prohibited after that open parenthesis '('
-:14: ERROR: space prohibited before that close parenthesis ')'
-:82: ERROR: trailing whitespace
-:87: WARNING: Block comments use a trailing */ on a separate line
-:88: ERROR: that open brace { should be on the previous line
-:88: ERROR: space prohibited after that open parenthesis '('
-:88: ERROR: space prohibited before that close parenthesis ')'
-:99: ERROR: else should follow close brace '}'

Link: https://github.com/ClangBuiltLinux/linux/issues/821
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
---
drivers/tty/synclink.c | 55 ++++++++++++++++++++----------------------
1 file changed, 26 insertions(+), 29 deletions(-)

diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 61dc6b4a43d0..586810defb21 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -1164,21 +1164,20 @@ static void mgsl_isr_receive_status( struct mgsl_struct *info )
printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
__FILE__,__LINE__,status);

- if ( (status & RXSTATUS_ABORT_RECEIVED) &&
+ if ((status & RXSTATUS_ABORT_RECEIVED) &&
info->loopmode_insert_requested &&
- usc_loopmode_active(info) )
- {
+ usc_loopmode_active(info)) {
++info->icount.rxabort;
- info->loopmode_insert_requested = false;
-
- /* clear CMR:13 to start echoing RxD to TxD */
+ info->loopmode_insert_requested = false;
+
+ /* clear CMR:13 to start echoing RxD to TxD */
info->cmr_value &= ~BIT13;
- usc_OutReg(info, CMR, info->cmr_value);
-
+ usc_OutReg(info, CMR, info->cmr_value);
+
/* disable received abort irq (no longer required) */
- usc_OutReg(info, RICR,
- (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
- }
+ usc_OutReg(info, RICR,
+ (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
+ }

if (status & (RXSTATUS_EXITED_HUNT | RXSTATUS_IDLE_RECEIVED)) {
if (status & RXSTATUS_EXITED_HUNT)
@@ -1970,8 +1969,8 @@ static void mgsl_change_params(struct mgsl_struct *info)
info->read_status_mask = RXSTATUS_OVERRUN;
if (I_INPCK(info->port.tty))
info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
- if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
- info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
+ if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+ info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;

if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
@@ -3211,7 +3210,7 @@ static int carrier_raised(struct tty_port *port)
struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);

spin_lock_irqsave(&info->irq_spinlock, flags);
- usc_get_serial_signals(info);
+ usc_get_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock, flags);
return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
}
@@ -3226,7 +3225,7 @@ static void dtr_rts(struct tty_port *port, int on)
info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- usc_set_serial_signals(info);
+ usc_set_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}

@@ -4907,24 +4906,22 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
/* of rounding up and then subtracting 1 we just don't subtract */
/* the one in this case. */

- /*--------------------------------------------------
- * ejz: for DPLL mode, application should use the
- * same clock speed as the partner system, even
- * though clocking is derived from the input RxData.
- * In case the user uses a 0 for the clock speed,
- * default to 0xffffffff and don't try to divide by
- * zero
- *--------------------------------------------------*/
- if ( info->params.clock_speed )
- {
+ /*
+ * ejz: for DPLL mode, application should use the
+ * same clock speed as the partner system, even
+ * though clocking is derived from the input RxData.
+ * In case the user uses a 0 for the clock speed,
+ * default to 0xffffffff and don't try to divide by
+ * zero
+ */
+ if (info->params.clock_speed) {
Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
/ info->params.clock_speed) )
Tc--;
- }
- else
- Tc = -1;
-
+ } else {
+ Tc = -1;
+ }

/* Write 16-bit Time Constant for BRG1 */
usc_OutReg( info, TC1R, Tc );
--
2.24.1
\
 
 \ /
  Last update: 2019-12-18 03:29    [W:0.040 / U:1.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site