lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtd: nand: brcmnand: Set appropriate DMA mask
Date
NAND controllers >= 7.0 with FLASH_DMA support physical addresses up to
40-bit, set an appropriate DMA mask for that purpose.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 1a66b1cd51c0..44518dada75b 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2635,6 +2635,16 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
/* initialize the dma version */
brcmnand_flash_dma_revision_init(ctrl);

+ ret = -EIO;
+ if (ctrl->nand_version >= 0x0700)
+ ret = dma_set_mask_and_coherent(&pdev->dev,
+ DMA_BIT_MASK(40));
+ if (ret)
+ ret = dma_set_mask_and_coherent(&pdev->dev,
+ DMA_BIT_MASK(32));
+ if (ret)
+ goto err;
+
/* linked-list and stop on error */
flash_dma_writel(ctrl, FLASH_DMA_MODE, FLASH_DMA_MODE_MASK);
flash_dma_writel(ctrl, FLASH_DMA_ERROR_STATUS, 0);
--
2.17.1
\
 
 \ /
  Last update: 2019-12-18 02:07    [W:0.041 / U:23.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site