lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] dt-bindings: I2C: Add X1000 bindings.
Date
Add the I2C bindings for the X1000 Soc from Ingenic.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---

Notes:
v1->v2:
No change.

v2->v3:
No change.

Documentation/devicetree/bindings/i2c/i2c-jz4780.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
index 3738cfb..d229eff 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt
@@ -1,7 +1,9 @@
* Ingenic JZ4780 I2C Bus controller

Required properties:
-- compatible: should be "ingenic,jz4780-i2c"
+- compatible: should be one of the following:
+ - "ingenic,jz4780-i2c" for the JZ4780
+ - "ingenic,x1000-i2c" for the X1000
- reg: Should contain the address & size of the I2C controller registers.
- interrupts: Should specify the interrupt provided by parent.
- clocks: Should contain a single clock specifier for the JZ4780 I2C clock.
--
2.7.4
\
 
 \ /
  Last update: 2019-12-17 09:16    [W:0.042 / U:9.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site