lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 6/8] net: bcmgenet: Turn on offloads by default
Date
We can turn on the RX/TX checksum offloads and the scatter/gather
features by default and make sure that those are properly reflected
back to e.g: stacked devices such as VLAN.

Signed-off-by: Doug Berger <opendmb@gmail.com>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 0df44c7076f1..b751fa76d0b0 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3532,9 +3532,11 @@ static int bcmgenet_probe(struct platform_device *pdev)

priv->msg_enable = netif_msg_init(-1, GENET_MSG_DEFAULT);

- /* Set hardware features */
- dev->hw_features |= NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_HW_CSUM |
- NETIF_F_RXCSUM;
+ /* Set default features */
+ dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_HW_CSUM |
+ NETIF_F_RXCSUM;
+ dev->hw_features |= dev->features;
+ dev->vlan_features |= dev->features;

/* Request the WOL interrupt and advertise suspend if available */
priv->wol_irq_disabled = true;
--
2.7.4
\
 
 \ /
  Last update: 2019-12-17 22:05    [W:0.083 / U:13.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site