lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 5/8] net: bcmgenet: Utilize bcmgenet_set_features() during resume/open
Date
During driver resume and open, the HW may have lost its context/state,
utilize bcmgenet_set_features() to make sure we do restore the correct
set of features that were previously configured.

Signed-off-by: Doug Berger <opendmb@gmail.com>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 8afa675b45da..0df44c7076f1 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2882,6 +2882,11 @@ static int bcmgenet_open(struct net_device *dev)

init_umac(priv);

+ /* Apply features again in case we changed them while interface was
+ * down
+ */
+ bcmgenet_set_features(dev, dev->features);
+
bcmgenet_set_hw_addr(priv, dev->dev_addr);

if (priv->internal_phy) {
@@ -3689,6 +3694,9 @@ static int bcmgenet_resume(struct device *d)
genphy_config_aneg(dev->phydev);
bcmgenet_mii_config(priv->dev, false);

+ /* Restore enabled features */
+ bcmgenet_set_features(dev, dev->features);
+
bcmgenet_set_hw_addr(priv, dev->dev_addr);

if (priv->internal_phy) {
--
2.7.4
\
 
 \ /
  Last update: 2019-12-17 22:04    [W:0.092 / U:12.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site