lkml.org 
[lkml]   [2019]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: sc7180: Enable video node
Date
This is a preparation gerrit to enable video node for sc7180.
This change depends on patch series Venus new features.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 52a5861..ccf9ef5 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1297,6 +1297,34 @@

#freq-domain-cells = <1>;
};
+
+ venus: video-codec@aa00000 {
+ compatible = "qcom,sc7180-venus";
+ reg = <0 0x0aa00000 0 0xff000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&videocc VENUS_GDSC>,
+ <&videocc VCODEC0_GDSC>;
+
+ power-domain-names = "venus", "vcodec0";
+ clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+ <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+ <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+ <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+ <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+ clock-names = "core", "iface", "bus",
+ "vcodec0_core", "vcodec0_bus";
+ iommus = <&apps_smmu 0x0C00 0x60>;
+ memory-region = <&venus_mem>;
+ video-core0 {
+ compatible = "venus-decoder";
+ };
+ video-core1 {
+ compatible = "venus-encoder";
+ };
+ video-firmware {
+ iommus = <&apps_smmu 0x0C42 0x0>;
+ };
+ };
};

thermal-zones {
--
1.9.1
\
 
 \ /
  Last update: 2019-12-17 08:55    [W:0.020 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site