lkml.org 
[lkml]   [2019]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] mfd: ab8500-core: Add device tree support for AB8505
On Sun, 17 Nov 2019, Stephan Gerhold wrote:

> AB8505 support was never fully converted to the device tree.
> Most of the MFD cells for AB8505 lack an "of_compatible",
> which prevents them from being configured through the device tree.
>
> Align the definition of the AB8505 MFD cells with the ones for AB8500,
> and add device tree compatibles. Except for GPIO and regulators the
> compatibles are equal to those used for AB8500 because the hardware
> does not differ much.
>
> Finally, change db8500_prcmu_register_ab8500() to check for the AB8505
> device tree node additionally, and probe it if it is found.
>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> drivers/mfd/ab8500-core.c | 14 ++++++++++++--
> drivers/mfd/db8500-prcmu.c | 26 ++++++++++++++++++++------
> 2 files changed, 32 insertions(+), 8 deletions(-)

Applied, thanks.

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2019-12-16 11:45    [W:0.050 / U:4.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site