lkml.org 
[lkml]   [2019]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 018/140] ARM: dts: pandora-common: define wl1251 as child node of mmc3
Date
From: H. Nikolaus Schaller <hns@goldelico.com>

commit 4f9007d692017cef38baf2a9b82b7879d5b2407b upstream.

Since v4.7 the dma initialization requires that there is a
device tree property for "rx" and "tx" channels which is
not provided by the pdata-quirks initialization.

By conversion of the mmc3 setup to device tree this will
finally allows to remove the OpenPandora wlan specific omap3
data-quirks.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.7+
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm/boot/dts/omap3-pandora-common.dtsi | 36 ++++++++++++++++++++++++++--
1 file changed, 34 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -229,6 +229,17 @@
gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */
};

+ /* wl1251 wifi+bt module */
+ wlan_en: fixed-regulator-wg7210_en {
+ compatible = "regulator-fixed";
+ regulator-name = "vwlan";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <50000>;
+ enable-active-high;
+ gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ };
+
/* wg7210 (wifi+bt module) 32k clock buffer */
wg7210_32k: fixed-regulator-wg7210_32k {
compatible = "regulator-fixed";
@@ -525,9 +536,30 @@
/*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */
};

-/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
&mmc3 {
- status = "disabled";
+ vmmc-supply = <&wlan_en>;
+
+ bus-width = <4>;
+ non-removable;
+ ti,non-removable;
+ cap-power-off-card;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wlan: wifi@1 {
+ compatible = "ti,wl1251";
+
+ reg = <1>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */
+
+ ti,wl1251-has-eeprom;
+ };
};

/* bluetooth*/

\
 
 \ /
  Last update: 2019-12-16 19:42    [W:0.331 / U:8.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site