lkml.org 
[lkml]   [2019]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.3 118/180] mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card
Date
From: H. Nikolaus Schaller <hns@goldelico.com>

commit f6498b922e57aecbe3b7fa30a308d9d586c0c369 upstream.

Pandora_wl1251_init_card was used to do special pdata based
setup of the sdio mmc interface. This does no longer work with
v4.7 and later. A fix requires a device tree based mmc3 setup.

Therefore we move the special setup to omap_hsmmc.c instead
of calling some pdata supplied init_card function.

The new code checks for a DT child node compatible to wl1251
so it will not affect other MMC3 use cases.

Generally, this code was and still is a hack and should be
moved to mmc core to e.g. read such properties from optional
DT child nodes.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.7+
[Ulf: Fixed up some checkpatch complaints]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/mmc/host/omap_hsmmc.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)

--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1512,6 +1512,36 @@ static void omap_hsmmc_init_card(struct

if (mmc_pdata(host)->init_card)
mmc_pdata(host)->init_card(card);
+ else if (card->type == MMC_TYPE_SDIO ||
+ card->type == MMC_TYPE_SD_COMBO) {
+ struct device_node *np = mmc_dev(mmc)->of_node;
+
+ /*
+ * REVISIT: should be moved to sdio core and made more
+ * general e.g. by expanding the DT bindings of child nodes
+ * to provide a mechanism to provide this information:
+ * Documentation/devicetree/bindings/mmc/mmc-card.txt
+ */
+
+ np = of_get_compatible_child(np, "ti,wl1251");
+ if (np) {
+ /*
+ * We have TI wl1251 attached to MMC3. Pass this
+ * information to the SDIO core because it can't be
+ * probed by normal methods.
+ */
+
+ dev_info(host->dev, "found wl1251\n");
+ card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+ card->cccr.wide_bus = 1;
+ card->cis.vendor = 0x104c;
+ card->cis.device = 0x9066;
+ card->cis.blksize = 512;
+ card->cis.max_dtr = 24000000;
+ card->ocr = 0x80;
+ of_node_put(np);
+ }
+ }
}

static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)

\
 
 \ /
  Last update: 2019-12-16 19:14    [W:0.502 / U:6.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site