lkml.org 
[lkml]   [2019]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/5] media: i2c: imx290: Add RAW12 mode support
Hi Sakari,

On Tue, Dec 03, 2019 at 10:54:17AM +0200, Sakari Ailus wrote:
> Hi Manivannan,
>
> On Sat, Nov 30, 2019 at 12:35:39AM +0530, Manivannan Sadhasivam wrote:
> > IMX290 is capable of outputting frames in both Raw Bayer (packed) 10 and
> > 12 bit formats. Since the driver already supports RAW10 mode, let's add
> > the missing RAW12 mode as well.
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> > drivers/media/i2c/imx290.c | 32 ++++++++++++++++++++++++++++++++
> > 1 file changed, 32 insertions(+)
> >
> > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > index e218c959a729..d5bb3a59ac46 100644
> > --- a/drivers/media/i2c/imx290.c
> > +++ b/drivers/media/i2c/imx290.c
> > @@ -75,6 +75,7 @@ struct imx290 {
> > struct clk *xclk;
> > struct regmap *regmap;
> > int nlanes;
> > + u8 bpp;
> >
> > struct v4l2_subdev sd;
> > struct v4l2_fwnode_endpoint ep;
> > @@ -98,6 +99,7 @@ struct imx290_pixfmt {
> >
> > static const struct imx290_pixfmt imx290_formats[] = {
> > { MEDIA_BUS_FMT_SRGGB10_1X10 },
> > + { MEDIA_BUS_FMT_SRGGB12_1X12 },
> > };
> >
> > static const struct regmap_config imx290_regmap_config = {
> > @@ -265,6 +267,18 @@ static const struct imx290_regval imx290_10bit_settings[] = {
> > { 0x300b, 0x00},
> > };
> >
> > +static const struct imx290_regval imx290_12bit_settings[] = {
> > + { 0x3005, 0x01 },
> > + { 0x3046, 0x01 },
> > + { 0x3129, 0x00 },
> > + { 0x317c, 0x00 },
> > + { 0x31ec, 0x0e },
> > + { 0x3441, 0x0c },
> > + { 0x3442, 0x0c },
> > + { 0x300a, 0xf0 },
> > + { 0x300b, 0x00 },
> > +};
> > +
> > /* supported link frequencies */
> > static const s64 imx290_link_freq[] = {
> > IMX290_DEFAULT_LINK_FREQ,
> > @@ -550,6 +564,21 @@ static int imx290_write_current_format(struct imx290 *imx290,
> > dev_err(imx290->dev, "Could not set format registers\n");
> > return ret;
> > }
> > +
> > + imx290->bpp = 10;
> > +
> > + break;
> > + case MEDIA_BUS_FMT_SRGGB12_1X12:
> > + ret = imx290_set_register_array(imx290, imx290_12bit_settings,
> > + ARRAY_SIZE(
> > + imx290_12bit_settings));
> > + if (ret < 0) {
> > + dev_err(imx290->dev, "Could not set format registers\n");
> > + return ret;
> > + }
> > +
> > + imx290->bpp = 12;
> > +
> > break;
> > default:
> > dev_err(imx290->dev, "Unknown pixel format\n");
> > @@ -910,6 +939,9 @@ static int imx290_probe(struct i2c_client *client)
> > goto free_err;
> > }
> >
> > + /* Default bits per pixel value */
> > + imx290->bpp = 10;
>
> Where is the format being initialised at the moment? Nowhere?
>
> If that is the case, I think it should be fixed before this patch.
>

Sorry, I don't quite understand what you're suggesting here. The bpp
is initialised because that's the default bit value at power up and
this value is being used below in imx290_calc_pixel_rate(). I'm not sure
why we need to initialise the format before set_fmt!

Thanks,
Mani

> > +
> > mutex_init(&imx290->lock);
> >
> > v4l2_ctrl_handler_init(&imx290->ctrls, 4);
>
> --
> Kind regards,
>
> Sakari Ailus

\
 
 \ /
  Last update: 2019-12-15 18:46    [W:0.053 / U:3.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site