lkml.org 
[lkml]   [2019]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/6] usb: musb: jz4740: Whitespace and indentation fixes
Date
Fix lines with too much or not enough indentation, and lines which were
indented with spaces instead of tabs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
drivers/usb/musb/jz4740.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index a8cd2ba2ed06..f948eca654f3 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -23,9 +23,9 @@ struct jz4740_glue {

static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
{
- unsigned long flags;
- irqreturn_t retval = IRQ_NONE, retval_dma = IRQ_NONE;
- struct musb *musb = __hci;
+ unsigned long flags;
+ irqreturn_t retval = IRQ_NONE, retval_dma = IRQ_NONE;
+ struct musb *musb = __hci;

spin_lock_irqsave(&musb->lock, flags);

@@ -42,7 +42,7 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
* never see them set
*/
musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME |
- MUSB_INTR_RESET | MUSB_INTR_SOF;
+ MUSB_INTR_RESET | MUSB_INTR_SOF;

if (musb->int_usb || musb->int_tx || musb->int_rx)
retval = musb_interrupt(musb);
@@ -56,20 +56,20 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
}

static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
-{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
-{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
-{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
+ { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
};

static const struct musb_hdrc_config jz4740_musb_config = {
/* Silicon does not implement USB OTG. */
- .multipoint = 0,
+ .multipoint = 0,
/* Max EPs scanned, driver will decide which EP can be used. */
- .num_eps = 4,
+ .num_eps = 4,
/* RAMbits needed to configure EPs from table */
- .ram_bits = 9,
- .fifo_cfg = jz4740_musb_fifo_cfg,
- .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
+ .ram_bits = 9,
+ .fifo_cfg = jz4740_musb_fifo_cfg,
+ .fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
};

static int jz4740_musb_init(struct musb *musb)
@@ -122,7 +122,7 @@ static int jz4740_probe(struct platform_device *pdev)
const struct musb_hdrc_platform_data *pdata = &jz4740_musb_pdata;
struct platform_device *musb;
struct jz4740_glue *glue;
- struct clk *clk;
+ struct clk *clk;
int ret;

glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
@@ -187,7 +187,7 @@ static int jz4740_probe(struct platform_device *pdev)

static int jz4740_remove(struct platform_device *pdev)
{
- struct jz4740_glue *glue = platform_get_drvdata(pdev);
+ struct jz4740_glue *glue = platform_get_drvdata(pdev);

platform_device_unregister(glue->pdev);
clk_disable_unprepare(glue->clk);
--
2.24.0
\
 
 \ /
  Last update: 2019-12-14 23:12    [W:0.048 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site