lkml.org 
[lkml]   [2019]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: BUG - was: [GIT PULL 2/3] bcm2835-soc-next-2019-10-15
From
Date
Hi Nikolaus,

[add Nicolas as the new BCM2835 maintainer]

Am 14.12.19 um 11:54 schrieb H. Nikolaus Schaller:
> Hi Stefan,
>
>> Am 15.10.2019 um 19:15 schrieb Stefan Wahren <wahrenst@gmx.net>:
>>
>> Hi Florian,
>>
>> The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:
>>
>> Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)
>>
>> are available in the git repository at:
>>
>> git://github.com/anholt/linux tags/bcm2835-soc-next-2019-10-15
>>
>> for you to fetch changes up to 781fa0a954240c8487683ddf837fb2c4ede8e7ca:
>>
>> ARM: bcm: Add support for BCM2711 SoC (2019-10-10 19:21:03 +0200)
> this patch has finally arrived in v5.5-rc1 but it seems to break
> multiplatform build.
>
> We run a distribution kernel that supports OMAP3/4/5, i.MX6 and RasPi 3B+
> but since rebasing to v5.5-rc1 the kernel hangs after "Starting Kernel ...".
> On all ARM devices (incl. RasPi 3B+).

i wasn't able to reproduce this issue with the RPi 3B+ so far and i
don't have any OMAP hardware:

Linux 5.3 (bcm2835_defconfig) + FW 2019-02-12 => okay
Linux 5.3 (bcm2835_defconfig + ZONE_DMA) + FW 2019-02-12 => okay
Linux 5.5-rc1 (bcm2835_defconfig) + FW 2019-02-12 => okay
Linux 5.5-rc1 (multi_v7_defconfig) + FW 2019-02-12 => okay

So please provide more information about your RPi 3B+ setup:

- VC firmware version
- additional bootloader (U-Boot)
- boot source (SD card, USB, network)
- kernel config

Did you tested the mainline kernel or the letux kernel?

Best regards
Stefan

\
 
 \ /
  Last update: 2019-12-14 17:55    [W:0.069 / U:6.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site