lkml.org 
[lkml]   [2019]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [EXT] [PATCH v8 08/12] thermal: qoriq: Convert driver to use regmap API
From
Date
On 13/12/2019 07:16, Andy Tang wrote:
> Hi Andrew,
>
> I failed to apply your patch. Could you please rebase it to the latest code and send me the patch directly?

Hi Andy,

I'm taking care of the series.

Thanks

-- Daniel


>> -----Original Message-----
>> From: Andrey Smirnov <andrew.smirnov@gmail.com>
>> Sent: 2019年12月11日 0:42
>> To: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Cc: Andrey Smirnov <andrew.smirnov@gmail.com>; Andy Tang
>> <andy.tang@nxp.com>; Anson Huang <anson.huang@nxp.com>; Lucas Stach
>> <l.stach@pengutronix.de>; Chris Healy <cphealy@gmail.com>; Eduardo
>> Valentin <edubezval@gmail.com>; Angus Ainslie <angus@akkea.ca>;
>> dl-linux-imx <linux-imx@nxp.com>; linux-pm@vger.kernel.org;
>> linux-kernel@vger.kernel.org
>> Subject: [EXT] [PATCH v8 08/12] thermal: qoriq: Convert driver to use regmap
>> API
>>
>> Caution: EXT Email
>>
>> Convert driver to use regmap API, drop custom LE/BE IO helpers and simplify
>> bit manipulation using regmap_update_bits(). This also allows us to convert
>> some register initialization to use loops and adds convenient debug access to
>> TMU registers via debugfs.
>>
>> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
>> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Tested-by: Lucas Stach <l.stach@pengutronix.de>
>> Cc: Chris Healy <cphealy@gmail.com>
>> Cc: Lucas Stach <l.stach@pengutronix.de>
>> Cc: Eduardo Valentin <edubezval@gmail.com>
>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Cc: Angus Ainslie (Purism) <angus@akkea.ca>
>> Cc: linux-imx@nxp.com
>> Cc: linux-pm@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>>
>> Yuantian, Anson:
>>
>> I don't have access to Layerscape HW that has v2 register layout, so if you
>> could give this patch a try and verify that I got the 'qoriq_yes_ranges' right,
>> I'd really appreciate it.
>>
>> Thanks,
>> Andrey Smirnov
>>
>> drivers/thermal/qoriq_thermal.c | 228 ++++++++++++++------------------
>> 1 file changed, 98 insertions(+), 130 deletions(-)
>>
>> diff --git a/drivers/thermal/qoriq_thermal.c
>> b/drivers/thermal/qoriq_thermal.c index 11749c673b3b..6227c940b9b0
>> 100644
>> --- a/drivers/thermal/qoriq_thermal.c
>> +++ b/drivers/thermal/qoriq_thermal.c
>> @@ -9,6 +9,7 @@
>> #include <linux/io.h>
>> #include <linux/of.h>
>> #include <linux/of_address.h>
>> +#include <linux/regmap.h>
>> #include <linux/thermal.h>
>>
>> #include "thermal_core.h"
>> @@ -24,85 +25,35 @@
>> #define TMU_VER1 0x1
>> #define TMU_VER2 0x2
>>
>> -/*
>> - * QorIQ TMU Registers
>> - */
>> -struct qoriq_tmu_site_regs {
>> - u32 tritsr; /* Immediate Temperature Site Register
>> */
>> - u32 tratsr; /* Average Temperature Site Register */
>> - u8 res0[0x8];
>> -};
>> +#define REGS_TMR 0x000 /* Mode Register */
>> +#define TMR_DISABLE 0x0
>> +#define TMR_ME 0x80000000
>> +#define TMR_ALPF 0x0c000000
>>
>> -struct qoriq_tmu_regs_v1 {
>> - u32 tmr; /* Mode Register */
>> - u32 tsr; /* Status Register */
>> - u32 tmtmir; /* Temperature measurement interval
>> Register */
>> - u8 res0[0x14];
>> - u32 tier; /* Interrupt Enable Register */
>> - u32 tidr; /* Interrupt Detect Register */
>> - u32 tiscr; /* Interrupt Site Capture Register */
>> - u32 ticscr; /* Interrupt Critical Site Capture Register
>> */
>> - u8 res1[0x10];
>> - u32 tmhtcrh; /* High Temperature Capture Register
>> */
>> - u32 tmhtcrl; /* Low Temperature Capture Register */
>> - u8 res2[0x8];
>> - u32 tmhtitr; /* High Temperature Immediate
>> Threshold */
>> - u32 tmhtatr; /* High Temperature Average Threshold
>> */
>> - u32 tmhtactr; /* High Temperature Average Crit Threshold */
>> - u8 res3[0x24];
>> - u32 ttcfgr; /* Temperature Configuration Register
>> */
>> - u32 tscfgr; /* Sensor Configuration Register */
>> - u8 res4[0x78];
>> - struct qoriq_tmu_site_regs site[SITES_MAX];
>> - u8 res5[0x9f8];
>> - u32 ipbrr0; /* IP Block Revision Register 0 */
>> - u32 ipbrr1; /* IP Block Revision Register 1 */
>> - u8 res6[0x310];
>> - u32 ttrcr[4]; /* Temperature Range Control Register */
>> -};
>> +#define REGS_TMTMIR 0x008 /* Temperature measurement
>> interval Register */
>> +#define TMTMIR_DEFAULT 0x0000000f
>>
>> -struct qoriq_tmu_regs_v2 {
>> - u32 tmr; /* Mode Register */
>> - u32 tsr; /* Status Register */
>> - u32 tmsr; /* monitor site register */
>> - u32 tmtmir; /* Temperature measurement interval
>> Register */
>> - u8 res0[0x10];
>> - u32 tier; /* Interrupt Enable Register */
>> - u32 tidr; /* Interrupt Detect Register */
>> - u8 res1[0x8];
>> - u32 tiiscr; /* interrupt immediate site capture
>> register */
>> - u32 tiascr; /* interrupt average site capture register
>> */
>> - u32 ticscr; /* Interrupt Critical Site Capture Register
>> */
>> - u32 res2;
>> - u32 tmhtcr; /* monitor high temperature capture
>> register */
>> - u32 tmltcr; /* monitor low temperature capture
>> register */
>> - u32 tmrtrcr; /* monitor rising temperature rate capture
>> register */
>> - u32 tmftrcr; /* monitor falling temperature rate capture
>> register */
>> - u32 tmhtitr; /* High Temperature Immediate Threshold */
>> - u32 tmhtatr; /* High Temperature Average Threshold */
>> - u32 tmhtactr; /* High Temperature Average Crit Threshold */
>> - u32 res3;
>> - u32 tmltitr; /* monitor low temperature immediate threshold
>> */
>> - u32 tmltatr; /* monitor low temperature average threshold
>> register */
>> - u32 tmltactr; /* monitor low temperature average critical
>> threshold */
>> - u32 res4;
>> - u32 tmrtrctr; /* monitor rising temperature rate critical
>> threshold */
>> - u32 tmftrctr; /* monitor falling temperature rate critical
>> threshold*/
>> - u8 res5[0x8];
>> - u32 ttcfgr; /* Temperature Configuration Register */
>> - u32 tscfgr; /* Sensor Configuration Register */
>> - u8 res6[0x78];
>> - struct qoriq_tmu_site_regs site[SITES_MAX];
>> - u8 res7[0x9f8];
>> - u32 ipbrr0; /* IP Block Revision Register 0 */
>> - u32 ipbrr1; /* IP Block Revision Register 1 */
>> - u8 res8[0x300];
>> - u32 teumr0;
>> - u32 teumr1;
>> - u32 teumr2;
>> - u32 res9;
>> - u32 ttrcr[4]; /* Temperature Range Control Register */
>> -};
>> +#define REGS_V2_TMSR 0x008 /* monitor site register */
>> +
>> +#define REGS_V2_TMTMIR 0x00c /* Temperature measurement interval
>> Register */
>> +
>> +#define REGS_TIER 0x020 /* Interrupt Enable Register */
>> +#define TIER_DISABLE 0x0
>> +
>> +
>> +#define REGS_TTCFGR 0x080 /* Temperature Configuration Register
>> */
>> +#define REGS_TSCFGR 0x084 /* Sensor Configuration Register */
>> +
>> +#define REGS_TRITSR(n) (0x100 + 16 * (n)) /* Immediate Temperature
>> + * Site Register
>> + */ #define
>> REGS_TTRnCR(n)
>> +(0xf10 + 4 * (n)) /* Temperature Range n
>> + * Control Register
>> + */
>> +#define REGS_IPBRR(n) (0xbf8 + 4 * (n)) /* IP Block Revision
>> + * Register n
>> + */
>> +#define REGS_V2_TEUMR(n) (0xf00 + 4 * (n))
>>
>> /*
>> * Thermal zone data
>> @@ -113,10 +64,8 @@ struct qoriq_sensor {
>>
>> struct qoriq_tmu_data {
>> int ver;
>> - struct qoriq_tmu_regs_v1 __iomem *regs;
>> - struct qoriq_tmu_regs_v2 __iomem *regs_v2;
>> + struct regmap *regmap;
>> struct clk *clk;
>> - bool little_endian;
>> struct qoriq_sensor sensor[SITES_MAX];
>> };
>>
>> @@ -125,29 +74,13 @@ static struct qoriq_tmu_data
>> *qoriq_sensor_to_data(struct qoriq_sensor *s)
>> return container_of(s, struct qoriq_tmu_data, sensor[s->id]); }
>>
>> -static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem
>> *addr) -{
>> - if (p->little_endian)
>> - iowrite32(val, addr);
>> - else
>> - iowrite32be(val, addr);
>> -}
>> -
>> -static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr) -{
>> - if (p->little_endian)
>> - return ioread32(addr);
>> - else
>> - return ioread32be(addr);
>> -}
>> -
>> static int tmu_get_temp(void *p, int *temp) {
>> struct qoriq_sensor *qsensor = p;
>> struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
>> u32 val;
>>
>> - val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr);
>> + regmap_read(qdata->regmap, REGS_TRITSR(qsensor->id), &val);
>> *temp = (val & 0xff) * 1000;
>>
>> return 0;
>> @@ -189,12 +122,12 @@ static int qoriq_tmu_register_tmu_zone(struct
>> device *dev,
>> /* Enable monitoring */
>> if (sites != 0) {
>> if (qdata->ver == TMU_VER1) {
>> - tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
>> - &qdata->regs->tmr);
>> + regmap_write(qdata->regmap, REGS_TMR,
>> + sites | TMR_ME | TMR_ALPF);
>> } else {
>> - tmu_write(qdata, sites,
>> &qdata->regs_v2->tmsr);
>> - tmu_write(qdata, TMR_ME | TMR_ALPF_V2,
>> - &qdata->regs_v2->tmr);
>> + regmap_write(qdata->regmap,
>> REGS_V2_TMSR, sites);
>> + regmap_write(qdata->regmap, REGS_TMR,
>> + TMR_ME | TMR_ALPF_V2);
>> }
>> }
>>
>> @@ -223,7 +156,7 @@ static int qoriq_tmu_calibration(struct device *dev,
>>
>> /* Init temperature range registers */
>> for (i = 0; i < len; i++)
>> - tmu_write(data, range[i], &data->regs->ttrcr[i]);
>> + regmap_write(data->regmap, REGS_TTRnCR(i), range[i]);
>>
>> calibration = of_get_property(np, "fsl,tmu-calibration", &len);
>> if (calibration == NULL || len % 8) { @@ -233,9 +166,9 @@ static
>> int qoriq_tmu_calibration(struct device *dev,
>>
>> for (i = 0; i < len; i += 8, calibration += 2) {
>> val = of_read_number(calibration, 1);
>> - tmu_write(data, val, &data->regs->ttcfgr);
>> + regmap_write(data->regmap, REGS_TTCFGR, val);
>> val = of_read_number(calibration + 1, 1);
>> - tmu_write(data, val, &data->regs->tscfgr);
>> + regmap_write(data->regmap, REGS_TSCFGR, val);
>> }
>>
>> return 0;
>> @@ -244,20 +177,40 @@ static int qoriq_tmu_calibration(struct device *dev,
>> static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) {
>> /* Disable interrupt, using polling instead */
>> - tmu_write(data, TIER_DISABLE, &data->regs->tier);
>> + regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
>>
>> /* Set update_interval */
>> +
>> if (data->ver == TMU_VER1) {
>> - tmu_write(data, TMTMIR_DEFAULT,
>> &data->regs->tmtmir);
>> + regmap_write(data->regmap, REGS_TMTMIR,
>> TMTMIR_DEFAULT);
>> } else {
>> - tmu_write(data, TMTMIR_DEFAULT,
>> &data->regs_v2->tmtmir);
>> - tmu_write(data, TEUMR0_V2, &data->regs_v2->teumr0);
>> + regmap_write(data->regmap, REGS_V2_TMTMIR,
>> TMTMIR_DEFAULT);
>> + regmap_write(data->regmap, REGS_V2_TEUMR(0),
>> TEUMR0_V2);
>> }
>>
>> /* Disable monitoring */
>> - tmu_write(data, TMR_DISABLE, &data->regs->tmr);
>> + regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
>> }
>>
>> +static const struct regmap_range qoriq_yes_ranges[] = {
>> + regmap_reg_range(REGS_TMR, REGS_TSCFGR),
>> + regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
>> + regmap_reg_range(REGS_V2_TEUMR(0), REGS_V2_TEUMR(2)),
>> + regmap_reg_range(REGS_IPBRR(0), REGS_IPBRR(1)),
>> + /* Read only registers below */
>> + regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)), };
>> +
>> +static const struct regmap_access_table qoriq_wr_table = {
>> + .yes_ranges = qoriq_yes_ranges,
>> + .n_yes_ranges = ARRAY_SIZE(qoriq_yes_ranges) - 1,
>> +};
>> +
>> +static const struct regmap_access_table qoriq_rd_table = {
>> + .yes_ranges = qoriq_yes_ranges,
>> + .n_yes_ranges = ARRAY_SIZE(qoriq_yes_ranges),
>> +};
>> +
>> static int qoriq_tmu_probe(struct platform_device *pdev) {
>> int ret;
>> @@ -265,18 +218,37 @@ static int qoriq_tmu_probe(struct platform_device
>> *pdev)
>> struct qoriq_tmu_data *data;
>> struct device_node *np = pdev->dev.of_node;
>> struct device *dev = &pdev->dev;
>> + const bool little_endian = of_property_read_bool(np,
>> "little-endian");
>> + const enum regmap_endian format_endian =
>> + little_endian ? REGMAP_ENDIAN_LITTLE :
>> REGMAP_ENDIAN_BIG;
>> + const struct regmap_config regmap_config = {
>> + .reg_bits = 32,
>> + .val_bits = 32,
>> + .reg_stride = 4,
>> + .rd_table = &qoriq_rd_table,
>> + .wr_table = &qoriq_wr_table,
>> + .val_format_endian = format_endian,
>> + .max_register = SZ_4K,
>> + };
>> + void __iomem *base;
>>
>> data = devm_kzalloc(dev, sizeof(struct qoriq_tmu_data),
>> GFP_KERNEL);
>> if (!data)
>> return -ENOMEM;
>>
>> - data->little_endian = of_property_read_bool(np, "little-endian");
>> -
>> - data->regs = devm_platform_ioremap_resource(pdev, 0);
>> - if (IS_ERR(data->regs)) {
>> + base = devm_platform_ioremap_resource(pdev, 0);
>> + ret = PTR_ERR_OR_ZERO(base);
>> + if (ret) {
>> dev_err(dev, "Failed to get memory region\n");
>> - return PTR_ERR(data->regs);
>> + return ret;
>> + }
>> +
>> + data->regmap = devm_regmap_init_mmio(dev, base,
>> &regmap_config);
>> + ret = PTR_ERR_OR_ZERO(data->regmap);
>> + if (ret) {
>> + dev_err(dev, "Failed to init regmap (%d)\n", ret);
>> + return ret;
>> }
>>
>> data->clk = devm_clk_get_optional(dev, NULL); @@ -290,10
>> +262,12 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
>> }
>>
>> /* version register offset at: 0xbf8 on both v1 and v2 */
>> - ver = tmu_read(data, &data->regs->ipbrr0);
>> + ret = regmap_read(data->regmap, REGS_IPBRR(0), &ver);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Failed to read IP block version\n");
>> + return ret;
>> + }
>> data->ver = (ver >> 8) & 0xff;
>> - if (data->ver == TMU_VER2)
>> - data->regs_v2 = (void __iomem *)data->regs;
>>
>> qoriq_tmu_init_device(data); /* TMU initialization */
>>
>> @@ -323,7 +297,7 @@ static int qoriq_tmu_remove(struct platform_device
>> *pdev)
>> struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
>>
>> /* Disable monitoring */
>> - tmu_write(data, TMR_DISABLE, &data->regs->tmr);
>> + regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
>>
>> clk_disable_unprepare(data->clk);
>>
>> @@ -332,13 +306,12 @@ static int qoriq_tmu_remove(struct
>> platform_device *pdev)
>>
>> static int __maybe_unused qoriq_tmu_suspend(struct device *dev) {
>> - u32 tmr;
>> struct qoriq_tmu_data *data = dev_get_drvdata(dev);
>> + int ret;
>>
>> - /* Disable monitoring */
>> - tmr = tmu_read(data, &data->regs->tmr);
>> - tmr &= ~TMR_ME;
>> - tmu_write(data, tmr, &data->regs->tmr);
>> + ret = regmap_update_bits(data->regmap, REGS_TMR, TMR_ME,
>> 0);
>> + if (ret)
>> + return ret;
>>
>> clk_disable_unprepare(data->clk);
>>
>> @@ -347,7 +320,6 @@ static int __maybe_unused
>> qoriq_tmu_suspend(struct device *dev)
>>
>> static int __maybe_unused qoriq_tmu_resume(struct device *dev) {
>> - u32 tmr;
>> int ret;
>> struct qoriq_tmu_data *data = dev_get_drvdata(dev);
>>
>> @@ -356,11 +328,7 @@ static int __maybe_unused
>> qoriq_tmu_resume(struct device *dev)
>> return ret;
>>
>> /* Enable monitoring */
>> - tmr = tmu_read(data, &data->regs->tmr);
>> - tmr |= TMR_ME;
>> - tmu_write(data, tmr, &data->regs->tmr);
>> -
>> - return 0;
>> + return regmap_update_bits(data->regmap, REGS_TMR, TMR_ME,
>> + TMR_ME);
>> }
>>
>> static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
>> --
>> 2.21.0
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2019-12-13 08:48    [W:0.116 / U:8.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site