lkml.org 
[lkml]   [2019]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 01/10] dt-bindings: add documentation of xilinx clocking wizard
On Thu, Nov 28, 2019 at 12:06:08PM +0530, shubhrajyoti.datta@gmail.com wrote:
> From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
>
> Add the devicetree binding for the xilinx clocking wizard.
>
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
> ---
> .../bindings/clock/xlnx,clocking-wizard.txt | 32 ++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.txt

New bindings should be in DT schema format.

>
> diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.txt b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.txt
> new file mode 100644
> index 0000000..aedac84
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.txt
> @@ -0,0 +1,32 @@
> +Binding for Xilinx Clocking Wizard IP Core
> +
> +This binding uses the common clock binding[1]. Details about the devices can be
> +found in the product guide[2].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Clocking Wizard Product Guide
> +http://www.xilinx.com/support/documentation/ip_documentation/clk_wiz/v5_1/pg065-clk-wiz.pdf
> +
> +Required properties:
> + - compatible: Must be 'xlnx,clocking-wizard'

That's not very specific. Is there only 1 version of this h/w?

> + - #clock-cells: Number of cells in a clock specifier. Should be 1
> + - reg: Base and size of the cores register space
> + - clocks: Handle to input clock
> + - clock-names: Tuple containing 'clk_in1' and 's_axi_aclk'
> + - clock-output-names: Names for the output clocks

You have to define the values.

> +
> +Optional properties:
> + - speed-grade: Speed grade of the device (valid values are 1..3)
> +
> +Example:
> + clock-generator@40040000 {
> + #clock-cells = <1>;
> + reg = <0x40040000 0x1000>;
> + compatible = "xlnx,clocking-wizard";
> + speed-grade = <1>;
> + clock-names = "clk_in1", "s_axi_aclk";
> + clocks = <&clkc 15>, <&clkc 15>;
> + clock-output-names = "clk_out0", "clk_out1", "clk_out2",
> + "clk_out3", "clk_out4", "clk_out5",
> + "clk_out6", "clk_out7";

Don't really need this to be in DT given all the names are the same
except for the index.

Rob

\
 
 \ /
  Last update: 2019-12-13 20:52    [W:0.133 / U:1.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site